American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Make New Varnish Look Old Pierre SD

It's best to keep the tinting very light so two or three coats of the polyurethane give you the color that matches your old finish. For one drawer, pour a small amount of polyurethane into a container. Add a few drops of the dye concentrate, mixing it in well. It'll look like a dark olive oil, which seems weird, but the color looks a whole lot different on the wood.

The Home Depot
(605)361-7439
2523 S Louise Ave
Sioux Falls, SD
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

Burke True Value
(605) 775-2804
906 Main St
Burke, SD
 
Avon True Value
(605) 286-3200
126 North Main
Avon, SD
 
Yankton - Auth Hometown
(605) 665-7861
2901 Broadway Ave
Yankton, SD
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-19
Tue:9-19
Wed:9-19
Thu:9-19
Fri:9-19
Sat:9-18
Sun:12-17
Store Features
Mon:9-19
Tue:9-19
Wed:9-19
Thu:9-19
Fri:9-19
Sat:9-18
Sun:12-17

Fullerton Lumber Co 938
(605) 665-9651
2409 Broadway Ave
Yankton, SD
 
Koenig True Value Lbr &hm Ctr
(605) 654-2101
30209 Us Highway 18
Fairfax, SD
 
Carlson Systems- Sioux Falls
605-368-9022
27079 Mueller Place Sioux Falls, SD, 57108
Sioux Falls, SD
 
Brookings Rent-All
(605) 697-5544
803 Main Avenue South
Brookings, SD
 
Engebretson Hardware Inc
(605) 594-3479
624 Main
Garretson, SD
 
Nygrens True Value
(605) 624-6725
9 Court St
Vermillion, SD
 

Make New Varnish Look Old

Make New Varnish Look Old


Q. I built my own kitchen cabinets a few years back. One drawer got damaged, so I stripped the finish from the drawer front, made the repair and applied a fresh coat of polyurethane. The new finish is noticeably lighter than the old one. I sure don't want to refinish the entire kitchen. Is there a way to match the aged finish?

A. The solution is to tint the new finish with dye. Varnish yellows with age and that's the reason your newly finished drawer doesn't match the old. I recommend using a dye called Orange Shellac from Wood Finishing Supplies. Don't let the name fool you; it's just a color and has nothing to do with real orange shellac. It's best to keep the tinting very light so two or three coats of the polyurethane give you the color that matches your old finish. For one drawer, pour a small amount of polyurethane into a container. Add a few drops of the dye concentrate, mixing it in well. It'll look like a dark olive oil, which seems weird, but the color looks a whole lot different on the wood. It will take some experimentation to get the dye-to-polyurethane ratio correct. Brush a couple of coats of the tinted poly on a test board. If the color matches, your formulating is done. If not, adjust the number of coats or the amount of dye until you get a good match.


#

Wood Finishing Supplies, (866) 548-1677, www.woodfinishingsupplies.com,2-oz. bottles of Color FX liquid dye, concentrates for oil-based media,Orange Shellac, $10.

Click here to read the rest of the article from American Woodworker