American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Make New Varnish Look Old Sewickley PA

It's best to keep the tinting very light so two or three coats of the polyurethane give you the color that matches your old finish. For one drawer, pour a small amount of polyurethane into a container. Add a few drops of the dye concentrate, mixing it in well. It'll look like a dark olive oil, which seems weird, but the color looks a whole lot different on the wood.

The Home Depot
(412)367-7346
999 Ross Park Drive
Pittsburgh, PA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(412)494-2844
440 Home Dr
Pittsburgh, PA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(724)779-5180
25 Dutilh Rd
Cranberry Township, PA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(412)363-9150
400 N Highland Ave
Pittsburgh, PA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(412)835-4271
4000 Oxford Drive
Bethel Park, PA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Rockler Woodworking and Hardware #31
(412) 364-7751
7402 McKnight Road
Pittsburgh, PA

Data Provided by:
The Home Depot
(724)449-4440
4960 Route 8
Allison Park, PA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(412)220-2241
1025 Washington Pike
Bridgeville, PA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(412)824-9406
3550 William Penn Hwy
Pittsburgh, PA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(724)846-7990
2670 Constitution Blvd
Beaver Falls, PA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Data Provided by:

Make New Varnish Look Old

Make New Varnish Look Old


Q. I built my own kitchen cabinets a few years back. One drawer got damaged, so I stripped the finish from the drawer front, made the repair and applied a fresh coat of polyurethane. The new finish is noticeably lighter than the old one. I sure don't want to refinish the entire kitchen. Is there a way to match the aged finish?

A. The solution is to tint the new finish with dye. Varnish yellows with age and that's the reason your newly finished drawer doesn't match the old. I recommend using a dye called Orange Shellac from Wood Finishing Supplies. Don't let the name fool you; it's just a color and has nothing to do with real orange shellac. It's best to keep the tinting very light so two or three coats of the polyurethane give you the color that matches your old finish. For one drawer, pour a small amount of polyurethane into a container. Add a few drops of the dye concentrate, mixing it in well. It'll look like a dark olive oil, which seems weird, but the color looks a whole lot different on the wood. It will take some experimentation to get the dye-to-polyurethane ratio correct. Brush a couple of coats of the tinted poly on a test board. If the color matches, your formulating is done. If not, adjust the number of coats or the amount of dye until you get a good match.


#

Wood Finishing Supplies, (866) 548-1677, www.woodfinishingsupplies.com,2-oz. bottles of Color FX liquid dye, concentrates for oil-based media,Orange Shellac, $10.

Click here to read the rest of the article from American Woodworker