American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Bandsaw Hobbs NM

Woodworking is a lot of fun. Although casters make this cumbersome piece of machinery much easier to move, you should only install them if you’re comfortable handling heavy loads. You will be surprised how much you can do when working with wood. You need a really good bandsaw to get you started. A bandsaw is the power tool used for precision woodcutting. Now you can even get a mobile bandsaw. You will find competitive pricing at the hardware supply stores in Hobbs, NM listed below.

The Home Depot
(575)492-9117
900 W Joe Harvey Blvd
Hobbs, NM
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Hobbs - Auth Hometown
(575) 492-0445
405 E Navajo Dr
Hobbs, NM
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-19
Tue:9-19
Wed:9-19
Thu:9-19
Fri:9-19
Sat:9-18.5
Sun:12-17
Store Features
Mon:9-19
Tue:9-19
Wed:9-19
Thu:9-19
Fri:9-19
Sat:9-18.5
Sun:12-17

Kmart 7016 / Cross Merch
(575) 397-3587
2220 N Grimes St
Hobbs, NM
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

The Home Depot
(575)492-9117
900 W Joe Harvey Blvd
Hobbs, NM
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(575)622-2026
2350 N Main
Roswell, NM
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Fastenal- Hobbs
505-393-8831
321 West Broadway Hobbs, NM, 88240
Hobbs, NM
 
Lowe's
(575) 492-3230
1510 West Joe Harvey Boulevard
Hobbs, NM
Hours
M-SA 7 am - 9 pm
SU 8 am - 8 pm

The Home Depot
(575)443-8018
3400 N White Sand Blvd
Alamogordo, NM
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Home Depot
(505) 424-9463
952 Richards Ave
Santa Fe, NM
 
The Home Depot
(505)327-0710
3560 E Main Street
Farmington, NM
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 7:00am-8:00pm

Bandsaw

Mobile Bandsaw

Horsing my bandsaw out of the way was a real pain until I installed a pair of large casters (see Source, below). Now my saw has a built-in two-wheel cart. During use, the saw sits firmly on the floor, because the wheels don’t touch the ground. They’re also out of the way. Tipping the saw and balancing it while moving is tricky until you get the hang of it, because the saw is top-heavy and awkward to hold. Although casters make this cumbersome piece of machinery much easier to move, you should only install them if you’re comfortable handling heavy loads. 

Stabilize the saw with your foot when you tilt it back and set it down. Be careful! The wheels make the saw hard to control until you find its balance point. 

Click here to read the rest of the article from American Woodworker