American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Bandsaw Van Wert OH

Woodworking is a lot of fun. Although casters make this cumbersome piece of machinery much easier to move, you should only install them if you’re comfortable handling heavy loads. You will be surprised how much you can do when working with wood. You need a really good bandsaw to get you started. A bandsaw is the power tool used for precision woodcutting. Now you can even get a mobile bandsaw. You will find competitive pricing at the hardware supply stores in Van Wert, OH listed below.

Van Wert - Auth Hometown
(419) 232-4900
1159 S Shannon St
Van Wert, OH
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:8.5-18
Tue:8.5-18
Wed:8.5-18
Thu:8.5-18
Fri:8.5-18
Sat:9-18
Sun:11-16
Store Features
Mon:8.5-18
Tue:8.5-18
Wed:8.5-18
Thu:8.5-18
Fri:8.5-18
Sat:9-18
Sun:11-16

Fastenal- Van Wert
419-232-4350
529 Bonnewitz Avenue Van Wert, OH, 45891
Van Wert, OH
 
Ottoville Do it center
(419) 453-3338
145 W 3rd Street
Ottoville, OH
 
Delphos Ace
(419) 692-0921
242 N Main St
Delphos, OH
 
Fastenal- Decatur
260-724-7093
1701 Patterson Street Decatur, IN, 46733
Decatur, IN
 
Lee's Ace Hardware
(419) 238-1546
647 W Ervin Rd
Van Wert, OH
 
Hall Do it Best Lumber
(419) 749-2119
122 S Main St
Convoy, OH
 
Tri County Do it center
(419) 692-6936
833 N Main St
Delphos, OH
 
Decatur Ace Hardware
(260) 724-3700
1220 S 13th St, Located on US 27, Across from Baymont Inn
Decatur, IN
 
Kmart 3664 / Cross Merch
(260) 728-2010
804 S 13Th St
Decatur, IN
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

Bandsaw

Mobile Bandsaw

Horsing my bandsaw out of the way was a real pain until I installed a pair of large casters (see Source, below). Now my saw has a built-in two-wheel cart. During use, the saw sits firmly on the floor, because the wheels don’t touch the ground. They’re also out of the way. Tipping the saw and balancing it while moving is tricky until you get the hang of it, because the saw is top-heavy and awkward to hold. Although casters make this cumbersome piece of machinery much easier to move, you should only install them if you’re comfortable handling heavy loads. 

Stabilize the saw with your foot when you tilt it back and set it down. Be careful! The wheels make the saw hard to control until you find its balance point. 

Click here to read the rest of the article from American Woodworker