American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Mobile Outfeed Tables Dover DE

I built two tables, which offer a lot of flexibility. I can butt them right up to the back of my contractor’s saw because the folding wings span the saw’s motor. When I rip a long board, I can put one table in front of the saw and one behind. When I crosscut a big piece of plywood, I can roll one of the tables to the left side of the saw.

The Home Depot
(302)735-8864
801 N Dupont Hwy
Dover, DE
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Dover - B
(302) 672-2200
1000 Dover Mall
Dover, DE
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:9-21
Sun:11-18
Store Features
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:9-21
Sun:11-18

LOWE'S OF DOVER, DEL.
302 735-7500
1450 N. DUPONT HIGHWAY DOVER, DE, 19901
Dover, DE
 
Fastenal- Dover
302-741-2445
1070A S. Little Creek Rd Dover, DE, 19901
Dover, DE
 
Best Ace Hardware
(302) 398-6447
3000 Midway/Shopping Ctr
Harrington, DE
 
Rommel's Ace Home Center
(302) 674-9100
321 A Independence Blvd
Dover, DE
 
Kmart 3158 / Cross Merch
(302) 678-8020
515 N Dupont Hwy
Dover, DE
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

Lowe's
(302) 735-7500
1450 N. Dupont Highway
Dover, DE
Hours
M-SA 6 am - 10 pm
SU 8 am - 8 pm

Lowe's
(302) 697-0700
516 Walmart Drive
Camden, DE
Hours
M-SA 6 am - 10 pm
SU 8 am - 8 pm

Fastenal- Milford
302-422-9629
105 Mullet Run Street Milford, DE, 19963
Milford, DE
 

Mobile Outfeed Tables

Mobile Outfeed Tables

Upgrade your tablesaw and save precious shop space with a pair of outfeed tables.

by George Vondriska

A tablesaw is a lot safer and easier to use when it’s equipped with an outfeed table. Whether you’re ripping long boards or crosscutting big sheets of plywood, you really need more support than just the top of your saw. 

Lots of folks have a huge outfeed table that sits permanently behind the saw, but that’s impractical in my compact shop. I’ve gone small and mobile instead. 

I built two tables, which offer a lot of flexibility. I can butt them right up to the back of my contractor’s saw because the folding wings span the saw’s motor. When I rip a long board, I can put one table in front of the saw and one behind. When I crosscut a big piece of plywood, I can roll one of the tables to the left side of the saw. When I need more open space around the saw, I fold down the wings and push the tables out of the way. 

As a bonus, these tables are great shop carts. They’re perfect for wheeling project parts from machine to machine. I also use them for glue-ups and assembly. Sweet! 

1: Adjustable Top

Level the top to compensate for an uneven floor by simply turning a screw at each corner. 

2: Heavy-Duty Folding Wings

Each wing is supported by super-strong brackets that open at precisely 90 degrees. The wings drop out of the way for compact storage. 

3: Melamine Surface

Wood slides effortlessly over this slick material. Dried glue pops right off, too.

4: Dust-Free Storage

There’s plenty of room for storing saw blades and other accessories.

5: Make Two

Arrange them in front, to the side or behind your saw.

6: Mobility

Locking casters let you roll the outfeed table  wherever you need it.


Customize Your Table’s Height

Our dimensions are designed for a saw of standard height: about 34 in. The table adjusts from 33-1/2 to 35-1/4 in. high. This allows you to fine-tune the exact height of the table to match your saw after the table is built. In addition, you can easily tilt the table’s top to compensate for an uneven floor. If you need a table with a different range (to include the height of a mobile base, for example), adjust the cabinet and door dimensions.

Build the Case

1. Cut the sides (A), subtop, bottom and shelf (B) and back (C) to size. Cut rabbets for the subtop, bottom and back. Cut dadoes for the shelf. Assemble the case and check it for square.

2. Cut the face frame parts (D, E, F) to size. When assembled, the face frame should be 1/16 in. longer and wider than the case. Use screw pockets to join the face frame rails to the stiles. Position the center rail so its top edge is even with the shelf.

3. Glue and clamp the face frame to the cabinet. Trim it flush after the glue is dry (Photo 1).

Make Drawers and Doors

4. Make a big pile of edge banding.

Click here to read the rest of the article from American Woodworker