American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Mobile Table Cabinet Billings MT

To keep the doors closed I used a sliding bolt, but a screw eye and hook is equally simple and effective.I attached the cabinet to a dolly with four conduit straps. All the materials, including the dolly, were purchased at a home center for about $40.

A & H Turf & Specialties, Inc.
(406) 245-8466
468 South Moore Lane
Billings, MT

Data Provided by:
Aldrich And Company
(406) 259-5531
2021 4th Ave North
Billings, MT
 
Fastenal- Billings
406-252-9090
1518 1st Ave N Billings, MT, 59101
Billings, MT
 
King's Ace Hardware
(406) 656-1445
2264 Central Ave
Billings, MT
 
Fastenal- Billings
406-652-7530
1050 S. 25th Street West Billings, MT, 59102
Billings, MT
 
The Home Depot
(406)655-9038
2784 King Ave West
Billings, MT
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

Kings Ace Hardware
(406) 245-0070
4170 State Ave
Billings, MT
 
West Park Plz
(406) 247-2700
1515 Grand Ave
Billings, MT
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:10-20
Tue:10-20
Wed:10-20
Thu:10-20
Fri:10-20
Sat:10-19
Sun:11-18
Store Features
Mon:10-20
Tue:10-20
Wed:10-20
Thu:10-20
Fri:10-20
Sat:10-19
Sun:11-18

LOWE'S OF BILLINGS, MT.
406 655-9317
2717 KING AVENUE WEST BILLINGS, MT, 59102
Billings, MT
 
Western Tool Supply- Billings
406-652-4797
3088 Gabel Road Billings, MT, 59102
Billings, MT
 
Data Provided by:

Mobile Table Cabinet

Mobile Table Cabinet

I bought my current house because of the big detached garage, which is perfect for my woodshop. However, when I started remodeling the house I got really tired of lugging boxes of tools from the garage to the house every weekend. To make things easier on my back, I made this mobile tool cabinet. It holds a variety of essential tools, which are easy to swap out for different tools when your needs change. I built this cabinet using 1x10 pine boards which are lightweight yet rugged. I fastened the cabinet sides to the top, bottom and shelves with biscuits, screws and glue. Then I glued and screwed the boards for the back. I added the pegboard inside to hang a variety of tools. 

I surface-mounted the leaf hinges to the outside of the cabinet. This approach allows the doors to stop in an “open book” position. This makes accessing the tools on the doors much more convenient than if the doors swung all the way around to the sides of the cabinet. 

I also added a small block of wood underneath the front edge of the cabinet so it tips backward slightly which helps keep the doors open when in use. To keep the doors closed I used a sliding bolt, but a screw eye and hook is equally simple and effective.I attached the cabinet to a dolly with four conduit straps. All the materials, including the dolly, were purchased at a home center for about $40. 


Click here to read the rest of the article from American Woodworker