American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Mobile Table Cabinet Leavenworth KS

To keep the doors closed I used a sliding bolt, but a screw eye and hook is equally simple and effective.I attached the cabinet to a dolly with four conduit straps. All the materials, including the dolly, were purchased at a home center for about $40.

The Home Depot
(913)727-1978
5000 S 4th Street
Leavenworth, KS
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

The Home Depot
(816)459-9950
4949 Old Pike Rd
Gladstone, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Westlake Ace Hardware
(913) 651-7795
3400 S 4th St Ste 4
Leavenworth, KS
 
Eggens True Value Hdwe
(816) 858-2414
2300 Kentucky Ave
Platte City, MO
 
Sebus Brothers True Value
(816) 386-2211
405 Main St
Weston, MO
 
The Home Depot
(816)741-2580
8900 NW Skyview Avenue
Kansas City, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Fastenal- Leavenworth
913-651-4433
5100 South 13th Leavenworth, KS, 66048
Leavenworth, KS
 
Leavenworth -Dlr In Kmart
(913) 250-6144
4820 S 4Th Street
Leavenworth, KS
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:8-22
Tue:8-22
Wed:8-22
Thu:8-22
Fri:8-22
Sat:8-21
Sun:9-20
Store Features
Mon:8-22
Tue:8-22
Wed:8-22
Thu:8-22
Fri:8-22
Sat:8-21
Sun:9-20

Hull Lumber Do it center
(816) 386-2212
18165 Highway 45 North
Weston, MO
 
LOWE'S OF N KANSAS CITY, MO.
816 746-4211
8601 N. BOARDWALK AVENUE KANSAS CITY, MO, 64154
Kansas City, MO
 

Mobile Table Cabinet

Mobile Table Cabinet

I bought my current house because of the big detached garage, which is perfect for my woodshop. However, when I started remodeling the house I got really tired of lugging boxes of tools from the garage to the house every weekend. To make things easier on my back, I made this mobile tool cabinet. It holds a variety of essential tools, which are easy to swap out for different tools when your needs change. I built this cabinet using 1x10 pine boards which are lightweight yet rugged. I fastened the cabinet sides to the top, bottom and shelves with biscuits, screws and glue. Then I glued and screwed the boards for the back. I added the pegboard inside to hang a variety of tools. 

I surface-mounted the leaf hinges to the outside of the cabinet. This approach allows the doors to stop in an “open book” position. This makes accessing the tools on the doors much more convenient than if the doors swung all the way around to the sides of the cabinet. 

I also added a small block of wood underneath the front edge of the cabinet so it tips backward slightly which helps keep the doors open when in use. To keep the doors closed I used a sliding bolt, but a screw eye and hook is equally simple and effective.I attached the cabinet to a dolly with four conduit straps. All the materials, including the dolly, were purchased at a home center for about $40. 


Click here to read the rest of the article from American Woodworker