American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Mobile Table Cabinet Maumee OH

To keep the doors closed I used a sliding bolt, but a screw eye and hook is equally simple and effective.I attached the cabinet to a dolly with four conduit straps. All the materials, including the dolly, were purchased at a home center for about $40.

The Home Depot
(419)866-3024
5900 W Airport Hwy
Toledo, OH
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Woodcraft - Toledo
(419) 389-0560
5311 Airport Highway
Toledo, OH

Data Provided by:
The Home Depot
(419)476-4573
1035 W Alexis Rd
Toledo, OH
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Magsig Sawmill
(419) 862-2441
4012 Sandusky County Road 56
Woodville, OH

Data Provided by:
ELECTRIC TOOL & EQUIPMENT INC
(419) 867-7670
3637 Briarfield Blvd Maumee, OH, 43537
Maumee, OH
 
The Home Depot
(419)872-5516
9570 US 20
Rossford, OH
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(419)537-1920
3200 Secor Rd
Toledo, OH
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(419)353-3731
1169 S Main Street
Bowling Green, OH
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Fastenal- Maumee
419-893-6161
825 Ford St. Units 4 & 5 Maumee, OH, 43537
Maumee, OH
 
White Cap- Toledo
(419) 897-0230
720 Ford Street Maumee, OH, 43537
Maumee, OH
 
Data Provided by:

Mobile Table Cabinet

Mobile Table Cabinet

I bought my current house because of the big detached garage, which is perfect for my woodshop. However, when I started remodeling the house I got really tired of lugging boxes of tools from the garage to the house every weekend. To make things easier on my back, I made this mobile tool cabinet. It holds a variety of essential tools, which are easy to swap out for different tools when your needs change. I built this cabinet using 1x10 pine boards which are lightweight yet rugged. I fastened the cabinet sides to the top, bottom and shelves with biscuits, screws and glue. Then I glued and screwed the boards for the back. I added the pegboard inside to hang a variety of tools. 

I surface-mounted the leaf hinges to the outside of the cabinet. This approach allows the doors to stop in an “open book” position. This makes accessing the tools on the doors much more convenient than if the doors swung all the way around to the sides of the cabinet. 

I also added a small block of wood underneath the front edge of the cabinet so it tips backward slightly which helps keep the doors open when in use. To keep the doors closed I used a sliding bolt, but a screw eye and hook is equally simple and effective.I attached the cabinet to a dolly with four conduit straps. All the materials, including the dolly, were purchased at a home center for about $40. 


Click here to read the rest of the article from American Woodworker