American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Mobile Table Cabinet Pacific MO

To keep the doors closed I used a sliding bolt, but a screw eye and hook is equally simple and effective.I attached the cabinet to a dolly with four conduit straps. All the materials, including the dolly, were purchased at a home center for about $40.

The Home Depot
(636)536-0675
390 Thf Boulevard
Chesterfield, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(636)922-1281
6190 Mid River Mall Dr
St Peter, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Pacific Do it Best Lumber
(636) 271-4863
625 S Fourth St
Pacific, MO
 
Dickey Bub True Value
(636) 587-3900
100 Hilltop Village Center Drive
Eureka, MO
 
Lowe's
(636) 728-0163
290 T.H.F. Blvd
Chesterfield, MO
Hours
M-SA 6 am - 10 pm
SU 8 am - 8 pm

The Home Depot
(636)207-8875
13929 Manchester Rd
Ballwin, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(314)909-7771
10890 Sunset Hills Plaza
Saint Louis, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Gray Summit Do it Best
(636) 451-2707
2625 Highway 100
Gray Summit, MO
 
LOWE'S OF CHESTERFIELD, MO.
636 728-0163
290 THF BLVD CHESTERFIELD, MO, 63005
Chesterfield, MO
 
High Ridge - Sears Hardware Stores
(636) 376-4330
40 Dillon Plaza Dr
High Ridge, MO
Store Hours
Hardware Stores
Store Type
Hardware Stores
Hours
Mon:8-21
Tue:8-21
Wed:8-21
Thu:8-21
Fri:8-21
Sat:8-21
Sun:9-18
Store Features
Mon:8-21
Tue:8-21
Wed:8-21
Thu:8-21
Fri:8-21
Sat:8-21
Sun:9-18

Mobile Table Cabinet

Mobile Table Cabinet

I bought my current house because of the big detached garage, which is perfect for my woodshop. However, when I started remodeling the house I got really tired of lugging boxes of tools from the garage to the house every weekend. To make things easier on my back, I made this mobile tool cabinet. It holds a variety of essential tools, which are easy to swap out for different tools when your needs change. I built this cabinet using 1x10 pine boards which are lightweight yet rugged. I fastened the cabinet sides to the top, bottom and shelves with biscuits, screws and glue. Then I glued and screwed the boards for the back. I added the pegboard inside to hang a variety of tools. 

I surface-mounted the leaf hinges to the outside of the cabinet. This approach allows the doors to stop in an “open book” position. This makes accessing the tools on the doors much more convenient than if the doors swung all the way around to the sides of the cabinet. 

I also added a small block of wood underneath the front edge of the cabinet so it tips backward slightly which helps keep the doors open when in use. To keep the doors closed I used a sliding bolt, but a screw eye and hook is equally simple and effective.I attached the cabinet to a dolly with four conduit straps. All the materials, including the dolly, were purchased at a home center for about $40. 


Click here to read the rest of the article from American Woodworker