American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Mobile Table Cabinet Severna Park MD

To keep the doors closed I used a sliding bolt, but a screw eye and hook is equally simple and effective.I attached the cabinet to a dolly with four conduit straps. All the materials, including the dolly, were purchased at a home center for about $40.

The Home Depot
(443)572-0077
66 Mountain Rd
Glen Burnie, MD
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

World of Hardwoods
(410) 636-3991
809 Barkwood Court
Linthicum, MD

Data Provided by:
The Home Depot
(301)497-7604
210 Ft Meade Road
Laurel, MD
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(410)631-4440
6315 Eastern Avenue
Baltimore, MD
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(301)805-8149
10301 M L King Jr. Hwy
Lanham, MD
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(410)897-9077
55 Forest Plaza
Annapolis, MD
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(410)247-8044
3750 Commerce Drive
Halethorpe, MD
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(301)809-3455
4121 Crain Hwy
Bowie, MD
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(410)872-0688
9051 Snowden River Pkwy
Columbia, MD
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(410)238-7892
6415 Petrie Way
Rosedale, MD
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Data Provided by:

Mobile Table Cabinet

Mobile Table Cabinet

I bought my current house because of the big detached garage, which is perfect for my woodshop. However, when I started remodeling the house I got really tired of lugging boxes of tools from the garage to the house every weekend. To make things easier on my back, I made this mobile tool cabinet. It holds a variety of essential tools, which are easy to swap out for different tools when your needs change. I built this cabinet using 1x10 pine boards which are lightweight yet rugged. I fastened the cabinet sides to the top, bottom and shelves with biscuits, screws and glue. Then I glued and screwed the boards for the back. I added the pegboard inside to hang a variety of tools. 

I surface-mounted the leaf hinges to the outside of the cabinet. This approach allows the doors to stop in an “open book” position. This makes accessing the tools on the doors much more convenient than if the doors swung all the way around to the sides of the cabinet. 

I also added a small block of wood underneath the front edge of the cabinet so it tips backward slightly which helps keep the doors open when in use. To keep the doors closed I used a sliding bolt, but a screw eye and hook is equally simple and effective.I attached the cabinet to a dolly with four conduit straps. All the materials, including the dolly, were purchased at a home center for about $40. 


Click here to read the rest of the article from American Woodworker