American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Multi-Function Router Base Ballwin MO

The Router Buddy is a 7-in.-dia. base plate that's bored to fit most popular routers. It's equipped with an integral edge guide/circle-cutting jig and a center hole that's counterbored to accept Porter-Cable guide bushings. Changing from one operation to another takes only seconds.

The Home Depot
(636)207-8875
13929 Manchester Rd
Ballwin, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(314)909-7771
10890 Sunset Hills Plaza
Saint Louis, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(636)922-1281
6190 Mid River Mall Dr
St Peter, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(636)936-9494
3891 Mexico Rd
Saint Charles, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Rockler Woodworking and Hardware #19
(314) 209-1116
11977 St. Charles-Rock Rd.
St. Louis (Bridgeton), MO

Data Provided by:
The Home Depot
(636)536-0675
390 Thf Boulevard
Chesterfield, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Woodcraft - St. Louis/Maryland Heights
(314) 993-0413
2077 Congressional Drive
St. Louis, MO

Data Provided by:
The Home Depot
(314)647-6050
1603 S Hanley Rd
Brentwood, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(314)733-1534
8901 Page Avenue
Overland, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(636)287-1111
3865 Vogel Rd
Arnold, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Data Provided by:

Multi-Function Router Base

Multi-Function Router Base

 

    

The Router Buddy is a 7-in.-dia. base plate that's bored to fit most popular routers. It's equipped with an integral edge guide/circle-cutting jig and a center hole that's counterbored to accept Porter-Cable guide bushings. Changing from one operation to another takes only seconds. The circle-cutting jig routs circles from 2-in.-dia. to 18-3/8-in.-dia. Install the fence and you've got an edge guide that allows routing dadoes and grooves up to 8-1/4-in. from the edge of the workpiece. This setup is compact and light as a feather, so it doesn't upset the router's balance. Attach the included half-rounds and you can rout grooves parallel to rounded edges. The half-rounds are also used during installation, to center the base around the bit shaft. The Router Buddy System includes extension rods, adjustable pivot pins and a cross-routed base. It extends the Buddy's versatility by adding the capacity to cut circles up to 60-in. in diameter and ellipses up to 58-in. by 46-in. You can vary the difference between major and minor ellipse axes up to 12 inches.

Source
Practical Technologies, LLC, www.practical-technologies.com, (603) 818-8442, Router Buddy, $70; Router Buddy System, $200.


Click here to read the rest of the article from American Woodworker