American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Multi-Function Router Base Burlington VT

The Router Buddy is a 7-in.-dia. base plate that's bored to fit most popular routers. It's equipped with an integral edge guide/circle-cutting jig and a center hole that's counterbored to accept Porter-Cable guide bushings. Changing from one operation to another takes only seconds.

The Home Depot
(802)872-0039
759 Harvest Lane
Williston, VT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Bibens Ace-So Burlington
(802) 864-1847
1961 Williston Rd
South Burlington, VT
 
Bibens Ace-Burlington
(802) 862-6068
Ethan Allen Shopping Ctr, 1127 North Ave
Burlington, VT
 
Russell Supply
(802) 863-1177
9 Gregory Drive South Burlington, VT, 05407
South Burlington, VT
 
Lowe's of Essex
802-662-9131
10 Sussie Wilson Rd Essex Junction, VT, 05452
Essex Junction, VT
 
Lowe's
(802) 318-9052
189 Hannaford Drive
South Burlington, VT
Hours
M-SA 6 am - 10 pm
SU 8 am - 7 pm

University Mall
(802) 859-2000
155 Dorset St
S Burlington, VT
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:9.5-21
Tue:9.5-21
Wed:9.5-21
Thu:9.5-21
Fri:9.5-21
Sat:9-21
Sun:10-18.5
Store Features
Mon:9.5-21
Tue:9.5-21
Wed:9.5-21
Thu:9.5-21
Fri:9.5-21
Sat:9-21
Sun:10-18.5

Lowe's of South Burlington, VT
802-318-9052
189 Hannaford Drive South Burlington, VT, 05403
South Burlington, VT
 
Bibens Ace-Colchester
(802) 863-4910
713 W Lakeshore Dr
Colchester, VT
 
Essex Equipment
(802) 879-0767
26 Kellogg Road
Essex Junction, VT
 

Multi-Function Router Base

Multi-Function Router Base

 

    

The Router Buddy is a 7-in.-dia. base plate that's bored to fit most popular routers. It's equipped with an integral edge guide/circle-cutting jig and a center hole that's counterbored to accept Porter-Cable guide bushings. Changing from one operation to another takes only seconds. The circle-cutting jig routs circles from 2-in.-dia. to 18-3/8-in.-dia. Install the fence and you've got an edge guide that allows routing dadoes and grooves up to 8-1/4-in. from the edge of the workpiece. This setup is compact and light as a feather, so it doesn't upset the router's balance. Attach the included half-rounds and you can rout grooves parallel to rounded edges. The half-rounds are also used during installation, to center the base around the bit shaft. The Router Buddy System includes extension rods, adjustable pivot pins and a cross-routed base. It extends the Buddy's versatility by adding the capacity to cut circles up to 60-in. in diameter and ellipses up to 58-in. by 46-in. You can vary the difference between major and minor ellipse axes up to 12 inches.

Source
Practical Technologies, LLC, www.practical-technologies.com, (603) 818-8442, Router Buddy, $70; Router Buddy System, $200.


Click here to read the rest of the article from American Woodworker