American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Multi-Function Router Base Westland MI

The Router Buddy is a 7-in.-dia. base plate that's bored to fit most popular routers. It's equipped with an integral edge guide/circle-cutting jig and a center hole that's counterbored to accept Porter-Cable guide bushings. Changing from one operation to another takes only seconds.

The Home Depot
(734)458-4956
13500 Middlebelt
Livonia, MI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Woodcraft - Canton, MI
(734) 981-6808
42102 Ford Road
Canton, MI

Data Provided by:
The Home Depot
(313)359-9600
25451 Michigan Avenue
Dearborn Heights, MI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(248)347-9600
39500 W 7 Mile Road
Northville, MI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(313)593-4644
5951 Mercury Drive
Dearborn, MI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(734)844-7300
39825 Ford Road
Canton, MI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(734)495-9414
45900 Michigan Ave
Canton, MI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(734)207-6147
47725 Five Mile Rd
Plymouth, MI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(734)287-7400
11100 Telegraph Road
Taylor, MI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(313)271-8842
3163 Fairlane Drive
Allen Park, MI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Data Provided by:

Multi-Function Router Base

Multi-Function Router Base

 

    

The Router Buddy is a 7-in.-dia. base plate that's bored to fit most popular routers. It's equipped with an integral edge guide/circle-cutting jig and a center hole that's counterbored to accept Porter-Cable guide bushings. Changing from one operation to another takes only seconds. The circle-cutting jig routs circles from 2-in.-dia. to 18-3/8-in.-dia. Install the fence and you've got an edge guide that allows routing dadoes and grooves up to 8-1/4-in. from the edge of the workpiece. This setup is compact and light as a feather, so it doesn't upset the router's balance. Attach the included half-rounds and you can rout grooves parallel to rounded edges. The half-rounds are also used during installation, to center the base around the bit shaft. The Router Buddy System includes extension rods, adjustable pivot pins and a cross-routed base. It extends the Buddy's versatility by adding the capacity to cut circles up to 60-in. in diameter and ellipses up to 58-in. by 46-in. You can vary the difference between major and minor ellipse axes up to 12 inches.

Source
Practical Technologies, LLC, www.practical-technologies.com, (603) 818-8442, Router Buddy, $70; Router Buddy System, $200.


Click here to read the rest of the article from American Woodworker