American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Multi-Function Router Base Winsted CT

The Router Buddy is a 7-in.-dia. base plate that's bored to fit most popular routers. It's equipped with an integral edge guide/circle-cutting jig and a center hole that's counterbored to accept Porter-Cable guide bushings. Changing from one operation to another takes only seconds.

The Home Depot
(860)496-8620
1580 Litchfield Tpke
New Hartford, CT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Moore's Sawmill
(860) 242-3003
171 Mountain Ave
Bloomfield, CT

Data Provided by:
Berkshire Products, Inc.
(413) 229-7919
884 Ashley Falls Rd PO Box 591
Sheffield, MA

Data Provided by:
Lowe's
(860) 618-4273
420 Winsted Road
Torrington, CT
Hours
M-SA 6 am - 10 pm
SU 7 am - 8 pm

Montana's Hardware Inc
(860) 658-1085
1414 Hopmeadow St
Simsbury, CT
 
The Home Depot
(860)582-5329
1149 Farmington Ave
Bristol, CT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(860)286-0300
55 Granby Street
Bloomfield, CT
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-7:00pm

Park Place Hardware
(860) 379-4274
11 Park Pl
Winsted, CT
 
Goshen Hardware Inc
(860) 491-3087
59 Torrington Rd
Goshen, CT
 
C A Lindell True Value Hdw & Lumber
(860) 824-5443
59 Church St
Canaan, CT
 
Data Provided by:

Multi-Function Router Base

Multi-Function Router Base

 

    

The Router Buddy is a 7-in.-dia. base plate that's bored to fit most popular routers. It's equipped with an integral edge guide/circle-cutting jig and a center hole that's counterbored to accept Porter-Cable guide bushings. Changing from one operation to another takes only seconds. The circle-cutting jig routs circles from 2-in.-dia. to 18-3/8-in.-dia. Install the fence and you've got an edge guide that allows routing dadoes and grooves up to 8-1/4-in. from the edge of the workpiece. This setup is compact and light as a feather, so it doesn't upset the router's balance. Attach the included half-rounds and you can rout grooves parallel to rounded edges. The half-rounds are also used during installation, to center the base around the bit shaft. The Router Buddy System includes extension rods, adjustable pivot pins and a cross-routed base. It extends the Buddy's versatility by adding the capacity to cut circles up to 60-in. in diameter and ellipses up to 58-in. by 46-in. You can vary the difference between major and minor ellipse axes up to 12 inches.

Source
Practical Technologies, LLC, www.practical-technologies.com, (603) 818-8442, Router Buddy, $70; Router Buddy System, $200.


Click here to read the rest of the article from American Woodworker