American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

New Way to Cut Tenons Claremore OK

A guide sheet is included with the bit, indicating which shims and spacers to use to achieve a tenon of a given size, but test cuts are still recommended to perfectly match the tenon to a mortise. You'll need at least a 2-1/4-hp router to rout the longest tenons in a single pass.

The Home Depot
(918)376-9975
9450 N 129th East Ave
Owasso, OK
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Claremore - Auth Hometown
(918) 343-2500
1648 North Lynn Riggs Blvd
Claremore, OK
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:8-21
Tue:8-21
Wed:8-21
Thu:8-21
Fri:8-21
Sat:8-21
Sun:8-20
Store Features
Mon:8-21
Tue:8-21
Wed:8-21
Thu:8-21
Fri:8-21
Sat:8-21
Sun:8-20

Fastenal- Claremore
918-342-4548
1614 North Lynn Riggs Blvd Claremore, OK, 74017
Claremore, OK
 
Cribbets True Value
(918) 371-3306
1008 Main St
Collinsville, OK
 
LOWE'S OF OWASSO, OK
918 274-0881
12001 E. 96TH STREET NORTH OWASSO, OK, 74055
Owasso, OK
 
Lowe's
(918) 923-1030
1746 South Lynn Riggs Boulevard
Claremore, OK
Hours
M-SA 7 am - 9 pm
SU 8 am - 8 pm

Westlake Ace Hardware
(918) 343-3117
810 N Lynn Riggs Blvd
Claremore, OK
 
Pixley Lumber Co
(918) 341-4223
715 W Will Rogers
Claremore, OK
 
Lowe's
(918) 274-0881
12001 E. 96Th Street North
Owasso, OK
Hours
M-SA 6 am - 10 pm
SU 8 am - 8 pm

Pryor Lumber
(918) 825-2260
1031 West Highway 20
Pryor, OK
 

New Way to Cut Tenons

New Way To Cut Tenons

    

The new CMT Tenon-Cutting Router Bit, $99, simplifies making tenons. Working like a massive tongue cutter, CMT's bit cuts tenons from 3/16 in. to 3/8 in. thick and as long as 1-1/16-in. in a single pass. It can handle material up to 1-3/8 in. thick. The bit consists of four stackable slot cutters and an assortment of spacers and shims. The beauty of this system is that once the slot cutters are correctly spaced, every tenon you cut is exactly the same size, regardless of minor differences in material thickness. In contrast, tenon-cutting techniques that require machining one face, then flipping the board to cut the other face, may result in irregularly sized tenons. A guide sheet is included with the bit, indicating which shims and spacers to use to achieve a tenon of a given size, but test cuts are still recommended to perfectly match the tenon to a mortise. You'll need at least a 2-1/4-hp router to rout the longest tenons in a single pass. You also need variable speed, since this bit should run at 12,000 rpm. The shop-made sled (see photo, left) is a must when cutting narrow rails.

Source 
CMT, (888) 268-2487, www.cmtusa.com Tenon-cutting router bit, #800.627.11, $99.

Click here to read the rest of the article from American Woodworker