American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

New Way to Cut Tenons Erlanger KY

A guide sheet is included with the bit, indicating which shims and spacers to use to achieve a tenon of a given size, but test cuts are still recommended to perfectly match the tenon to a mortise. You'll need at least a 2-1/4-hp router to rout the longest tenons in a single pass.

The Home Depot
(859)283-1460
99 Spiral Blvd
Florence, KY
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Indus Construction Products Inc.
(513) 241-1551
1455 Dalton Avenue
Cincinnati, OH

Data Provided by:
The Home Depot
(859)572-0018
415 Crossroads Blvd
Cold Spring, KY
Hours
Mon-Sat: 7:00am-10:00pm
Sun: 8:00am-8:00pm

Finished Dimensions Inc.
(513) 353-4500
5445 State Route 128
Cleves, OH

Data Provided by:
Salem Door Company
(513) 552-3000
2120 Stapleton Drive
Cincinnati, OH

Data Provided by:
The Home Depot
(859)331-4500
500 Clock Tower Way
Crescent Springs, KY
Hours
Mon-Sat: 7:00am-10:00pm
Sun: 8:00am-8:00pm

The Bromwell Company
(513) 621-0620
117 West Fourth Street
Cincinnati, OH

Data Provided by:
The Home Depot
(513)661-2413
6300 Glenway Ave
Cincinnati, OH
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(513)688-1654
520 Ohio Pike
Cincinnati, OH
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Bushelman Supply Co.
(513) 771-9121
250 Marion Road
Cincinnati, OH

Data Provided by:
Data Provided by:

New Way to Cut Tenons

New Way To Cut Tenons

    

The new CMT Tenon-Cutting Router Bit, $99, simplifies making tenons. Working like a massive tongue cutter, CMT's bit cuts tenons from 3/16 in. to 3/8 in. thick and as long as 1-1/16-in. in a single pass. It can handle material up to 1-3/8 in. thick. The bit consists of four stackable slot cutters and an assortment of spacers and shims. The beauty of this system is that once the slot cutters are correctly spaced, every tenon you cut is exactly the same size, regardless of minor differences in material thickness. In contrast, tenon-cutting techniques that require machining one face, then flipping the board to cut the other face, may result in irregularly sized tenons. A guide sheet is included with the bit, indicating which shims and spacers to use to achieve a tenon of a given size, but test cuts are still recommended to perfectly match the tenon to a mortise. You'll need at least a 2-1/4-hp router to rout the longest tenons in a single pass. You also need variable speed, since this bit should run at 12,000 rpm. The shop-made sled (see photo, left) is a must when cutting narrow rails.

Source 
CMT, (888) 268-2487, www.cmtusa.com Tenon-cutting router bit, #800.627.11, $99.

Click here to read the rest of the article from American Woodworker