American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

New Way to Cut Tenons Inman SC

A guide sheet is included with the bit, indicating which shims and spacers to use to achieve a tenon of a given size, but test cuts are still recommended to perfectly match the tenon to a mortise. You'll need at least a 2-1/4-hp router to rout the longest tenons in a single pass.

The Home Depot
(864)574-2922
121 Dorman Center Drive
Spartanburg, SC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(864)848-6083
1385 Wade Hampton Blvd W
Greer, SC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

LOWE'S OF BOILING SPRINGS, SC
864 573-2771
170 RAINBOW LAKE ROAD BOILING SPRINGS, SC, 29316
Boiling Springs, SC
 
Fastenal- Spartanburg
864-948-9600
67 Dexter Rd Spartanburg, SC, 29303
Spartanburg, SC
 
Lowe's
(864) 573-2771
170 Rainbow Lake Road
Boiling Springs, SC
Hours
M-SA 7 am - 9 pm
SU 9 am - 7 pm

Packard Woodworks (Tools Only - No Wood)
(800) 683-8876
PO Box 718
Tryon, NC

Data Provided by:
The Home Depot
(864)579-0382
2300 E Main Street
Spartanburg, SC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Blue Eagle Equipment
864-583-0700
350 TNS Road Spartanburg, SC, 29303
Spartanburg, SC
 
Ace Hardware
(864) 578-7008
3433 Boiling Springs Road
Spartanburg, SC
 
Johnson's Ace Hardware
(864) 439-3485
10409 Greenville Hwy
Wellford, SC
 
Data Provided by:

New Way to Cut Tenons

New Way To Cut Tenons

    

The new CMT Tenon-Cutting Router Bit, $99, simplifies making tenons. Working like a massive tongue cutter, CMT's bit cuts tenons from 3/16 in. to 3/8 in. thick and as long as 1-1/16-in. in a single pass. It can handle material up to 1-3/8 in. thick. The bit consists of four stackable slot cutters and an assortment of spacers and shims. The beauty of this system is that once the slot cutters are correctly spaced, every tenon you cut is exactly the same size, regardless of minor differences in material thickness. In contrast, tenon-cutting techniques that require machining one face, then flipping the board to cut the other face, may result in irregularly sized tenons. A guide sheet is included with the bit, indicating which shims and spacers to use to achieve a tenon of a given size, but test cuts are still recommended to perfectly match the tenon to a mortise. You'll need at least a 2-1/4-hp router to rout the longest tenons in a single pass. You also need variable speed, since this bit should run at 12,000 rpm. The shop-made sled (see photo, left) is a must when cutting narrow rails.

Source 
CMT, (888) 268-2487, www.cmtusa.com Tenon-cutting router bit, #800.627.11, $99.

Click here to read the rest of the article from American Woodworker