American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

New Way to Cut Tenons Springfield VA

A guide sheet is included with the bit, indicating which shims and spacers to use to achieve a tenon of a given size, but test cuts are still recommended to perfectly match the tenon to a mortise. You'll need at least a 2-1/4-hp router to rout the longest tenons in a single pass.

Woodcraft - Springfield
(703) 912-6727
Concord Shopping Center
Springfield, VA

Data Provided by:
The Home Depot
(703)642-3660
6555 Little River Trnpke
Alexandria, VA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(703)205-1245
2815 Merrilee Drive
Fairfax, VA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(703)619-5124
7710 Richmond Hwy
Alexandria, VA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Vienna Hardwoods
(703) 255-9663
241 Mill Street Northeast
Vienna, VA

Data Provided by:
The Home Depot
(703)924-0193
6691 Frontier Road
Springfield, VA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(703)534-9580
6210 Seven Corners Ctr
Falls Church, VA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(703)823-1900
400 S Pickett St
Alexandria, VA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(703)591-6808
3201 Old Lee Highway
Fairfax, VA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(703)670-3699
14025 Foulger Square
Woodbridge, VA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Data Provided by:

New Way to Cut Tenons

New Way To Cut Tenons

    

The new CMT Tenon-Cutting Router Bit, $99, simplifies making tenons. Working like a massive tongue cutter, CMT's bit cuts tenons from 3/16 in. to 3/8 in. thick and as long as 1-1/16-in. in a single pass. It can handle material up to 1-3/8 in. thick. The bit consists of four stackable slot cutters and an assortment of spacers and shims. The beauty of this system is that once the slot cutters are correctly spaced, every tenon you cut is exactly the same size, regardless of minor differences in material thickness. In contrast, tenon-cutting techniques that require machining one face, then flipping the board to cut the other face, may result in irregularly sized tenons. A guide sheet is included with the bit, indicating which shims and spacers to use to achieve a tenon of a given size, but test cuts are still recommended to perfectly match the tenon to a mortise. You'll need at least a 2-1/4-hp router to rout the longest tenons in a single pass. You also need variable speed, since this bit should run at 12,000 rpm. The shop-made sled (see photo, left) is a must when cutting narrow rails.

Source 
CMT, (888) 268-2487, www.cmtusa.com Tenon-cutting router bit, #800.627.11, $99.

Click here to read the rest of the article from American Woodworker