American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

New Way to Cut Tenons Winsted CT

A guide sheet is included with the bit, indicating which shims and spacers to use to achieve a tenon of a given size, but test cuts are still recommended to perfectly match the tenon to a mortise. You'll need at least a 2-1/4-hp router to rout the longest tenons in a single pass.

The Home Depot
(860)496-8620
1580 Litchfield Tpke
New Hartford, CT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(860)286-0300
55 Granby Street
Bloomfield, CT
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-7:00pm

Berkshire Products, Inc.
(413) 229-7919
884 Ashley Falls Rd PO Box 591
Sheffield, MA

Data Provided by:
Lowe's
(860) 618-4273
420 Winsted Road
Torrington, CT
Hours
M-SA 6 am - 10 pm
SU 7 am - 8 pm

C A Lindell True Value Hdw & Lumber
(860) 824-5443
59 Church St
Canaan, CT
 
Moore's Sawmill
(860) 242-3003
171 Mountain Ave
Bloomfield, CT

Data Provided by:
The Home Depot
(860)582-5329
1149 Farmington Ave
Bristol, CT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Park Place Hardware
(860) 379-4274
11 Park Pl
Winsted, CT
 
Goshen Hardware Inc
(860) 491-3087
59 Torrington Rd
Goshen, CT
 
Montana's Hardware Inc
(860) 658-1085
1414 Hopmeadow St
Simsbury, CT
 
Data Provided by:

New Way to Cut Tenons

New Way To Cut Tenons

    

The new CMT Tenon-Cutting Router Bit, $99, simplifies making tenons. Working like a massive tongue cutter, CMT's bit cuts tenons from 3/16 in. to 3/8 in. thick and as long as 1-1/16-in. in a single pass. It can handle material up to 1-3/8 in. thick. The bit consists of four stackable slot cutters and an assortment of spacers and shims. The beauty of this system is that once the slot cutters are correctly spaced, every tenon you cut is exactly the same size, regardless of minor differences in material thickness. In contrast, tenon-cutting techniques that require machining one face, then flipping the board to cut the other face, may result in irregularly sized tenons. A guide sheet is included with the bit, indicating which shims and spacers to use to achieve a tenon of a given size, but test cuts are still recommended to perfectly match the tenon to a mortise. You'll need at least a 2-1/4-hp router to rout the longest tenons in a single pass. You also need variable speed, since this bit should run at 12,000 rpm. The shop-made sled (see photo, left) is a must when cutting narrow rails.

Source 
CMT, (888) 268-2487, www.cmtusa.com Tenon-cutting router bit, #800.627.11, $99.

Click here to read the rest of the article from American Woodworker