American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Nicely-Priced HVLP Cranston RI

Overall I was able to get a reasonably good finish from the Earlex 3000. It wasn't perfect, but spraying a finish is much quicker than brushing. If you're interested in trying out HVLP finishes, this unit is a good starting point.

The Home Depot
(401)823-5173
700 Centre Of N E Blvd
Coventry, RI
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-7:00pm

The Home Depot
(401)295-1184
1255 Ten Rod Road
North Kingstown, RI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Liberty Cedar, Inc.
(401) 789-6626
325 Liberty Lane
West Kingston, RI

Data Provided by:
Lowe's
(401) 275-2250
247 Garfield Avenue
Cranston, RI
Hours
M-SA 6 am - 10 pm
SU 8 am - 8 pm

Kamco True Value
(401) 463-5266
37 Amflex Dr
Cranston, RI
 
Woodcraft - Providence, RI
(401) 886-1175
1000 Division Street
East Greenwich, RI

Data Provided by:
St. Angelo Hardwoods, Inc. - Genuine Asian Teak Specialist
(401) 624-3900
490 Eagleville Road
Tiverton, RI

Data Provided by:
The Home Depot
(401)845-5092
878 W Main Road
Middletown, RI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Durfee True Value Hdw.
(401) 461-0800
65 Rolfe Sq
Cranston, RI
 
Hardware On The Square True Value
(401) 831-1400
1911 Westminster St
Providence, RI
 
Data Provided by:

Nicely-Priced HVLP

Nicely-Priced HVLP

    

You can spend plenty of dough on an HVLP (high volume low pressure) spray system, so I was surprised to see the price on the Earlex HVLP 3000.  At $120, it looked like it might be too good to be true.  Now that I've run lots of finish through the unit, I'm impressed. I covered the gamut with this unit, spraying solvent-based shellac, lacquer, and polyurethane, as well as water-based polyurethane. Low viscosity products, like shellac and some water-based polys, will spray better if you get a needle kit specifically designed for them.  This adds $25 to the price. The Earlex 3000 does have some compromises compared to higher-end units.  Airflow is either on or off, not adjustable.  This means you can't finesse the droplet size as the finish comes out of the gun, which can affect the look of the finished product. And at 9-ft. 6-in., the hose is quite short.  I nearly pulled the turbine off my bench when I stretched the hose too far. Overall I was able to get a reasonably good finish from the Earlex 3000.  It wasn't perfect, but spraying a finish is much quicker than brushing. If you're interested in trying out HVLP finishes, this unit is a good starting point.

Source
Earlex,(888) 783-2612, www.earlex.com, Earlex HVLP 3000, $120. Thin Finish needle kit, HVACC10R, $24.99.


Click here to read the rest of the article from American Woodworker