American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Nicely-Priced HVLP Holt MI

Overall I was able to get a reasonably good finish from the Earlex 3000. It wasn't perfect, but spraying a finish is much quicker than brushing. If you're interested in trying out HVLP finishes, this unit is a good starting point.

The Home Depot
(517)381-0650
1749 Newman Rd
Okemos, MI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

PARKER LUMBER
(517) 543-7068
760 S. Stine Road
Charlotte, MI

Data Provided by:
Ace Hardware of Holt
(517) 694-3575
1960 Cedar St, Edru skate rink
Holt, MI
 
LOWE'S OF S. LANSING, MI
517 699-2940
6821 SOUTH CEDAR STREET LANSING, MI, 48911
Lansing, MI
 
Lowe's
(517) 699-2940
6821 South Cedar Street
Lansing, MI
Hours
M-SA 7 am - 10 pm
SU 8 am - 8 pm

The Home Depot
(517)323-0229
936 S Waverly Rd
Lansing, MI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Johnson's Workbench
(517) 543-2727
563 N Cochran Ave
Charlotte, MI

Data Provided by:
Kmart 4382 / Cross Merch
(517) 393-8770
5400 Cedar St S
Lansing, MI
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

Apco Inc.
(517) 882-2455
5511 Enterprise Dr
Lansing, MI
 
Fasteners Inc- Lansing
517-485-5858
1211 Haco Drive Lansing, MI, 48912
Lansing, MI
 
Data Provided by:

Nicely-Priced HVLP

Nicely-Priced HVLP

    

You can spend plenty of dough on an HVLP (high volume low pressure) spray system, so I was surprised to see the price on the Earlex HVLP 3000.  At $120, it looked like it might be too good to be true.  Now that I've run lots of finish through the unit, I'm impressed. I covered the gamut with this unit, spraying solvent-based shellac, lacquer, and polyurethane, as well as water-based polyurethane. Low viscosity products, like shellac and some water-based polys, will spray better if you get a needle kit specifically designed for them.  This adds $25 to the price. The Earlex 3000 does have some compromises compared to higher-end units.  Airflow is either on or off, not adjustable.  This means you can't finesse the droplet size as the finish comes out of the gun, which can affect the look of the finished product. And at 9-ft. 6-in., the hose is quite short.  I nearly pulled the turbine off my bench when I stretched the hose too far. Overall I was able to get a reasonably good finish from the Earlex 3000.  It wasn't perfect, but spraying a finish is much quicker than brushing. If you're interested in trying out HVLP finishes, this unit is a good starting point.

Source
Earlex,(888) 783-2612, www.earlex.com, Earlex HVLP 3000, $120. Thin Finish needle kit, HVACC10R, $24.99.


Click here to read the rest of the article from American Woodworker