American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Nicely-Priced HVLP Windsor CT

Overall I was able to get a reasonably good finish from the Earlex 3000. It wasn't perfect, but spraying a finish is much quicker than brushing. If you're interested in trying out HVLP finishes, this unit is a good starting point.

Moore's Sawmill
(860) 242-3003
171 Mountain Ave
Bloomfield, CT

Data Provided by:
Woodcraft - Manchester/Hartford, CT
(860) 647-0303
249 Spencer Street
Manchester, CT

Data Provided by:
Connecticut Wood Group's Hardwood Outlet
(860) 253-0444
18 Mullen Road
Enfield, CT

Data Provided by:
Woodcraft - West Springfield
(413) 827-0244
239A Memorial Ave
West Springfield, MA

Data Provided by:
The Home Depot
(860)496-8620
1580 Litchfield Tpke
New Hartford, CT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(860)286-0300
55 Granby Street
Bloomfield, CT
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-7:00pm

The Home Depot
(860)231-1919
503 New Park Ave
West Hartford, CT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 9:00am-6:00pm

The Home Depot
(413)731-9700
179 Dagget Drive
West Springfield, MA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(860)828-9440
225 Berlin Turnpike
Berlin, CT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(860)582-5329
1149 Farmington Ave
Bristol, CT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Data Provided by:

Nicely-Priced HVLP

Nicely-Priced HVLP

    

You can spend plenty of dough on an HVLP (high volume low pressure) spray system, so I was surprised to see the price on the Earlex HVLP 3000.  At $120, it looked like it might be too good to be true.  Now that I've run lots of finish through the unit, I'm impressed. I covered the gamut with this unit, spraying solvent-based shellac, lacquer, and polyurethane, as well as water-based polyurethane. Low viscosity products, like shellac and some water-based polys, will spray better if you get a needle kit specifically designed for them.  This adds $25 to the price. The Earlex 3000 does have some compromises compared to higher-end units.  Airflow is either on or off, not adjustable.  This means you can't finesse the droplet size as the finish comes out of the gun, which can affect the look of the finished product. And at 9-ft. 6-in., the hose is quite short.  I nearly pulled the turbine off my bench when I stretched the hose too far. Overall I was able to get a reasonably good finish from the Earlex 3000.  It wasn't perfect, but spraying a finish is much quicker than brushing. If you're interested in trying out HVLP finishes, this unit is a good starting point.

Source
Earlex,(888) 783-2612, www.earlex.com, Earlex HVLP 3000, $120. Thin Finish needle kit, HVACC10R, $24.99.


Click here to read the rest of the article from American Woodworker