American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

No-Tweak Dovetail Jig Silver City NM

Guide rails fully support the router, so you don't have to balance it on the jig. And the jig comes fully assembled—all you have to do is bolt it to a board. This jig is easy to get started with and easy to use.

Sun Valley Do it Best
(575) 538-3291
1401 Silver Heights Blvd
Silver City, NM
 
Mountain Ridge Hardware LLC
(575) 534-0782
3025 Highway 180 E
Silver City, NM
 
The Home Depot
(575)622-2026
2350 N Main
Roswell, NM
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(505)327-0710
3560 E Main Street
Farmington, NM
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 7:00am-8:00pm

The Home Depot
(505)833-9990
2820 Coors Blvd NW
Albuquerque, NM
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Silver City - Auth Hometown
(575) 538-5328
1310 Silver Heights Blvd
Silver City, NM
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:23-16
Store Features
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:23-16

Gila Lumber & True Value Hardware
(800) 642-7392
1000 Central Ave
Bayard, NM

Data Provided by:
The Home Depot
(575)492-9117
900 W Joe Harvey Blvd
Hobbs, NM
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(505)899-1290
10200 Coors Dr NW
Albuquerque, NM
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(505)771-3523
7700 US 550 NE
Rio Rancho, NM
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Data Provided by:

No-Tweak Dovetail Jig

No-Tweak Dovetail Jig



The Akeda dovetail jig first hit the woodworking world in March 2003. Production problems took this tool off the market for a while, but now it's back and available from more distributors than before. The Akeda DC-16 jig, $330, has a 16-in. capacity and cuts variably spaced through and half-blind dovetails. A handful of points separate this jig from others. No jig-tweaking is required to get a perfect fit of the joint. Cut 'em, put 'em together and that's it. The guide fingers snap in and out of the jig; no tools are required. A $30 dust port can connect to effectively capture a lot of the chips that pour off the cutter. Guide rails fully support the router, so you don't have to balance it on the jig. And the jig comes fully assembled—all you have to do is bolt it to a board. This jig is easy to get started with and easy to use. The negative side? Well, the price adds up fast. The base price gets you the jig and one set of guide fingers. Add $36 to get the two basic router bits you need for through dovetails in 3/4-in. stock. You can buy extra bits and fingers for half-blind dovetails and other thicknesses of material individually or in a package. A package that includes the jig, dust port and every set of fingers and bits the jig can handle costs $500. The 16-in. capacity is also a disadvantage. Comparable jigs in this price range have a 24-in. capacity. Akeda hopes to have a 24-in. version later in 2005.

Source:
Akeda Jig, (877) 387-6544, www.akedajigs.com, Akeda DC-16 jig, $330.


Click here to read the rest of the article from American Woodworker