American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Perfectly Sized Dadoes Centerville UT

You could make your own guide for the Dado Wiz, but the clamp guide, $45, is a worthwhile accessory. It automatically squares up against the edge of your material, rigidly locking in place. If you've already got this style of clamp, you can get the squaring head only for $25.

The Home Depot
(801)292-0238
50 N Market Place Dr
Centerville, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

MacBeath Hardwood Company
(801) 484-7616
1576 So. 300 West
Salt Lake City, UT

Data Provided by:
The Home Depot
(801)461-4248
3398 S Highland Drive
Salt Lake City, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(801)621-7373
999 W Riverdale Road
Riverdale, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Dicks Ace Hardware
(801) 292-1471
380 E Pages Ln
Centerville, UT
 
The Home Depot
(801)543-2296
449 N. Main St
Layton, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(801)467-3900
328 West 2100 South St
Salt Lake City, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(801)963-4700
4581 S 4000 W
West Valley City, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Colonial Bldg Supply Inc
(801) 295-9471
530 N 400 W
Centerville, UT
 
Lowe's of West Bountiful, UT
801-813-4200
350 North 545 West West Bountiful, UT, 84087
West Bountiful, UT
 
Data Provided by:

Perfectly Sized Dadoes

Perfectly Sized Dadoes

 

Fine-tuning dado width for a perfect fit can drive you nuts because plywood thickness is inconsistent. Enter the Dado Wiz, $159. That's a lot of dough for a dado-only jig, but this router-based guide virtually guarantees a perfect fit on the first try. The easy road to success comes from setting up the Dado Wiz with the material that goes into the dado. Simply squeeze it between the index pins on the jig; then lock the sliding head. The sliding head creates an opening in the Dado Wiz that a Porter-Cable-style guide bushing (included) drops into. Using a bit that's smaller than the dado (for instance, a 1/2-in. bit for a 3/4-in. dado), you make two passes, holding the guide bushing against the left side of the opening for the first pass and against the right side for the second. A variety of index marks allow you to fine-tune the dado width if it's too large or small.
You could make your own guide for the Dado Wiz, but the clamp guide, $45, is a worthwhile accessory. It automatically squares up against the edge of your material, rigidly locking in place. If you've already got this style of clamp, you can get the squaring head only for $25.

Source:
Woodline, (800) 472-6950, www.woodline.com, Dado Wiz, DWIZ, $159; Clamp guide, DW100, $45, Clamp head only, DW90, $25.


Click here to read the rest of the article from American Woodworker