American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Perfectly Sized Dadoes Gilbert AZ

You could make your own guide for the Dado Wiz, but the clamp guide, $45, is a worthwhile accessory. It automatically squares up against the edge of your material, rigidly locking in place. If you've already got this style of clamp, you can get the squaring head only for $25.

The Home Depot
(480)497-1466
745 S Val Vista Dr
Gilbert, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(480)396-0227
425 S Val Vista Dr
Mesa, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(480)644-9111
1740 S Country Club Dr
Mesa, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(480)461-0251
853 N Dobson Road
Mesa, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(480)753-3320
650 N 54th St, Suite A
Chandler, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(480) 497-1466
745 S Val Vista Dr
Gilbert, AZ
 
Woodcraft - Chandler/Phoenix, AZ
(888) 549-9663
3002 N. Arizona Ave.
Chandler, AZ

Data Provided by:
The Home Depot
(480)899-5013
1155 W Chandler Blvd
Chandler, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Woodworkers Source - Store #1
(480) 355-5090
645 W. Elliot Rd
Tempe, AZ

Data Provided by:
The Home Depot
(480)496-9700
725 W Warner Rd
Tempe, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Data Provided by:

Perfectly Sized Dadoes

Perfectly Sized Dadoes

 

Fine-tuning dado width for a perfect fit can drive you nuts because plywood thickness is inconsistent. Enter the Dado Wiz, $159. That's a lot of dough for a dado-only jig, but this router-based guide virtually guarantees a perfect fit on the first try. The easy road to success comes from setting up the Dado Wiz with the material that goes into the dado. Simply squeeze it between the index pins on the jig; then lock the sliding head. The sliding head creates an opening in the Dado Wiz that a Porter-Cable-style guide bushing (included) drops into. Using a bit that's smaller than the dado (for instance, a 1/2-in. bit for a 3/4-in. dado), you make two passes, holding the guide bushing against the left side of the opening for the first pass and against the right side for the second. A variety of index marks allow you to fine-tune the dado width if it's too large or small.
You could make your own guide for the Dado Wiz, but the clamp guide, $45, is a worthwhile accessory. It automatically squares up against the edge of your material, rigidly locking in place. If you've already got this style of clamp, you can get the squaring head only for $25.

Source:
Woodline, (800) 472-6950, www.woodline.com, Dado Wiz, DWIZ, $159; Clamp guide, DW100, $45, Clamp head only, DW90, $25.


Click here to read the rest of the article from American Woodworker