American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Perfectly Sized Dadoes Roswell NM

You could make your own guide for the Dado Wiz, but the clamp guide, $45, is a worthwhile accessory. It automatically squares up against the edge of your material, rigidly locking in place. If you've already got this style of clamp, you can get the squaring head only for $25.

The Home Depot
(575)622-2026
2350 N Main
Roswell, NM
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Westlake Ace Hardware
(575) 624-0550
2810 D N Main St
Roswell, NM
 
Kmart 7017 / Cross Merch
(505) 623-7480
1705 S Main St
Roswell, NM
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

Home Depot
(505) 424-9463
952 Richards Ave
Santa Fe, NM
 
The Home Depot
(505)771-3523
7700 US 550 NE
Rio Rancho, NM
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Broadmoor Ctr
(575) 622-1310
1000 S Main St
Roswell, NM
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:9.5-18
Tue:9.5-18
Wed:9.5-18
Thu:9.5-18
Fri:9.5-18
Sat:9.5-18
Sun:12-18
Store Features
Mon:9.5-18
Tue:9.5-18
Wed:9.5-18
Thu:9.5-18
Fri:9.5-18
Sat:9.5-18
Sun:12-18

Roswell Lumber Do it center
(575) 622-7841
200 S Main
Roswell, NM
 
The Home Depot
(505)899-1290
10200 Coors Dr NW
Albuquerque, NM
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(575)443-8018
3400 N White Sand Blvd
Alamogordo, NM
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Woodcraft - Albuquerque, NM
(505) 342-9663
4520B Alexander NE
Albuquerque, NM

Data Provided by:
Data Provided by:

Perfectly Sized Dadoes

Perfectly Sized Dadoes

 

Fine-tuning dado width for a perfect fit can drive you nuts because plywood thickness is inconsistent. Enter the Dado Wiz, $159. That's a lot of dough for a dado-only jig, but this router-based guide virtually guarantees a perfect fit on the first try. The easy road to success comes from setting up the Dado Wiz with the material that goes into the dado. Simply squeeze it between the index pins on the jig; then lock the sliding head. The sliding head creates an opening in the Dado Wiz that a Porter-Cable-style guide bushing (included) drops into. Using a bit that's smaller than the dado (for instance, a 1/2-in. bit for a 3/4-in. dado), you make two passes, holding the guide bushing against the left side of the opening for the first pass and against the right side for the second. A variety of index marks allow you to fine-tune the dado width if it's too large or small.
You could make your own guide for the Dado Wiz, but the clamp guide, $45, is a worthwhile accessory. It automatically squares up against the edge of your material, rigidly locking in place. If you've already got this style of clamp, you can get the squaring head only for $25.

Source:
Woodline, (800) 472-6950, www.woodline.com, Dado Wiz, DWIZ, $159; Clamp guide, DW100, $45, Clamp head only, DW90, $25.


Click here to read the rest of the article from American Woodworker