American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » ยป

Pipe-Clamp Vise Austell GA

To change the jaw's position, remove the pin, loosen the nuts and rotate the clamp head. Then reset the pin and tighten the nuts. Read on to learn more detailed information.

The Home Depot
(770)732-0184
1000 Thornton Road
Lithia Springs, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(678)567-1161
1062 Richard D Sailors
Powder Springs, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(770)432-9930
2450 Cumberland Pkwy
Atlanta, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(770)439-0707
145 Depot Drive
Hiram, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(404)841-5608
2525 Piedmont Road NE
Atlanta, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(770)438-9678
1200 E W Connector SW
Austell, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(404)691-2077
1032 Research Center
Atlanta, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(770)792-6858
2350 Dallas Hwy
Marietta, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(770)577-8311
7399 Douglas Blvd
Douglasville, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(404)892-8042
650 Ponce DE Leon
Atlanta, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Pipe-Clamp Vise

Pipe-Clamp Vise

My bench has only one vise, so it needs to be versatile. The jaws on my vise can be positioned to hold objects flat on the bench or cantilevered off the end. In addition, the clamp is removable, so I can still use it for regular clamping jobs.

My vise is based on an ordinary 3/4-in. pipe clamp with one modification: The pipe is threaded 1-3/4 in. (extra long) for mounting.

I used scraps of 1/2-in. Baltic birch for the brackets. I got everything else, including the clamp, at a hardware store for about $25.

1. Drill holes in the brackets for the screws and pipe ( Fig. A ). Enlarge the 1-in.-dia. holes with a file to make the pipe fit.
2. Mount the brackets and install the clamp with its jaws positioned vertically. Fasten the clamp to the front bracket by threading on two 3/4-in. electrical conduit lock nuts.
3. Drill a 1/4-in. hole through the bracket and the clamp head for the positioning pin (a 1/4-in. quick-release pin from the hardware store).
4. Loosen the nuts, rotate the clamp head 90 degrees and retighten the nuts. Use the hole in the clamp head as a guide while you drill the second positioning hole in the bracket. 5. Install the positioning pin.

To change the jaw's position, remove the pin, loosen the nuts and rotate the clamp head. Then reset the pin and tighten the nuts.

Click here to read the rest of the article from American Woodworker