American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Plastic Stickers Don't Stain Bellefontaine OH

For strength, you can use 1-1/4-in.-i.d. Schedule-80 rigid PVC electrical conduit. Available from home centers and electrical supply stores, it costs about $12 for a 10-ft. length. Schedule-40 rigid PVC conduit is much less expensive but thinner-walled, so it doesn’t support as much weight.

Hochstetler Lumber
(937) 468-2482
77 W. Country Route 113
Bellefontaine, OH

Data Provided by:
Lowe's
(937) 599-4000
2168 Us 68 South
Bellefontaine, OH
Hours
M-SA 7 am - 9 pm
SU 8 am - 8 pm

Lakeview Ace Hardware
(937) 843-4220
Route 33, Midway Plaza US ROUTE 33
Lakeview, OH
 
West Mansfield Ace Hardware
(937) 355-3581
229 S Main St
West Mansfield, OH
 
Skelley Lumber Company Inc
(937) 653-7158
1300 N. Main St.
Urbana, OH
 
Fastenal- Bellefontaine
937-593-0065
811 S. Main Street Bellefontaine, OH, 43311
Bellefontaine, OH
 
LOWE'S OF BELLEFONTAINE, OH.
937 599-4000
2168 US 68 SOUTH BELLEFONTAINE, OH, 43311
Bellefontaine, OH
 
Lakeview Hardware
(937) 843-4220
Midway Plaza Rt 33
Lakeview, OH
 
S & L True Value Home Center
(937) 652-1088
1711 E State Rte 36
Urbana, OH
 
Williams Hardware
(937) 653-4166
795 Scioto Street
Urbana, OH
 
Data Provided by:

Plastic Stickers Don't Stain

Plastic Stickers Don't Stain

I use plastic conduit to make stickers for stacking and drying my wood. These stickers provide consistent spacing and excellent air circulation with minimal contact. I’ve never had problems with insects, mold or staining, which can occur around wooden stickers, especially when the wood is green and the air is damp.

For strength, I use 1-1/4-in.-i.d. Schedule-80 rigid PVC electrical conduit. Available from home centers and electrical supply stores, it costs about $12 for a 10-ft. length. Schedule-40 rigid PVC conduit is much less expensive but thinner-walled, so it doesn’t support as much weight. I only use it for small stacks. Both Schedule-40 and Schedule-80 rigid PVC conduit are suitable for indoor and outdoor use.

After cutting the conduit to sticker lengths, I cut them in half on my bandsaw, using a simple jig to hold the sticker in position (see photo, above). To keep the conduit from rotating during the cut, I follow a straight line drawn on its surface. To draw the line, I simply lay a flat board next the conduit and use the board as a straightedge.

Click here to read the rest of the article from American Woodworker