American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Plastic Stickers Don't Stain Brookings SD

For strength, you can use 1-1/4-in.-i.d. Schedule-80 rigid PVC electrical conduit. Available from home centers and electrical supply stores, it costs about $12 for a 10-ft. length. Schedule-40 rigid PVC conduit is much less expensive but thinner-walled, so it doesn’t support as much weight.

Ace Hardware
(605) 697-5223
710 22nd Ave S, Brookings Mall
Brookings, SD
 
Homestead Building Supplies
(605) 692-6191
823 S Main Avenue
Brookings, SD
 
Lowe's
(605) 696-2730
812 25Th Avenue
Brookings, SD
Hours
M-SA 7 am - 9 pm
SU 8 am - 8 pm

J & K Building Center
(605) 997-3714
110 S Wind
Flandreau, SD
 
Fastenal- Spearfish
605-717-3278
4311 E Colorado Blvd Ste A Spearfish, SD, 57783
Spearfish, SD
 
Fastenal- Brookings
605-697-6631
1321 Main Avenue South Brookings, SD, 57006
Brookings, SD
 
Lowe's of Brookings
605-696-2730
812 25th Ave Brookings, SD, 57006
Brookings, SD
 
Brookings Rent-All
(605) 697-5544
803 Main Avenue South
Brookings, SD
 
The Home Depot
(605)361-7439
2523 S Louise Ave
Sioux Falls, SD
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

Dakota Do it Best Lumber Co
(605) 892-4041
Highway 85 North
Belle Fourche, SD
 

Plastic Stickers Don't Stain

Plastic Stickers Don't Stain

I use plastic conduit to make stickers for stacking and drying my wood. These stickers provide consistent spacing and excellent air circulation with minimal contact. I’ve never had problems with insects, mold or staining, which can occur around wooden stickers, especially when the wood is green and the air is damp.

For strength, I use 1-1/4-in.-i.d. Schedule-80 rigid PVC electrical conduit. Available from home centers and electrical supply stores, it costs about $12 for a 10-ft. length. Schedule-40 rigid PVC conduit is much less expensive but thinner-walled, so it doesn’t support as much weight. I only use it for small stacks. Both Schedule-40 and Schedule-80 rigid PVC conduit are suitable for indoor and outdoor use.

After cutting the conduit to sticker lengths, I cut them in half on my bandsaw, using a simple jig to hold the sticker in position (see photo, above). To keep the conduit from rotating during the cut, I follow a straight line drawn on its surface. To draw the line, I simply lay a flat board next the conduit and use the board as a straightedge.

Click here to read the rest of the article from American Woodworker