American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Plumb Your Shop with Air Anderson SC

Every article I read on plumbing air lines advised using either iron or copper. Because my basement shop holds a lot of obstructions, using iron or copper would result in a whole lot of threading or soldering of short little pieces. Besides, copper and iron fittings are costly.

The Home Depot
(864)964-0820
3427 Clemson Blvd
Anderson, SC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(864)886-0633
1614 Sandifer Blvd
Seneca, SC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

TRADO SUPPLIES
864-225-4438
10105 WHITEHALL RD ANDERSON, SC, 29623
Anderson, SC
 
Fastenal- Anderson
864-375-9994
297 Commerce Blvd Anderson, SC, 29625
Anderson, SC
 
Kmart 7754 / Cross Merch
(864) 716-0800
3801 B Clemson Blvd
Anderson, SC
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :0-0 and for Sat:0-0
Sun:0-0
Store Features
Monday To Friday Working Hours is :0-0 and for Sat:0-0
Sun:0-0

The Home Depot
(706)376-1748
1700 Anderson Hwy
Hartwell, GA
Hours
Mon-Sat: 7:00am-9:00pm
Sun: 8:00am-7:00pm

White Jones Ace Hardware
(864) 225-1406
Watson Village Shpg Ctr, 128 E Shockley Ferry Rd
Anderson, SC
 
White Jones Ace Hardware
(864) 225-1600
2903 N Main St
Anderson, SC
 
LOWE'S OF ANDERSON, S. C.
864 964-9228
3515 CLEMSON BLVD. ANDERSON, SC, 29621
Anderson, SC
 
Lowe's
(864) 964-9228
3515 Clemson Blvd.
Anderson, SC
Hours
M-SA 6 am - 10 pm
SU 8 am - 8 pm

Plumb Your Shop with Air

Plumb Your Shop With AIr

Flexible Hose Saves Time and Money

by Richard Tendick

Moments after I tripped over the air hose and dropped an armload of boards, I decided it was time to plumb my shop for air.  I was tired of having 50 ft. of hose on the floor and dashing back to the compressor to adjust the line pressure. I knew a permanent system could deliver the right amount of air where and when I needed it—without a big hose snaked dangerously across the floor. 

Every article I read on plumbing air lines advised using either iron or copper.  Because my basement shop holds a lot of obstructions, using iron or copper would result in a whole lot of threading or soldering of short little pieces. Besides, copper and iron fittings are costly. 

Ultimately, I decided on a solution I had used many times in my 27 years as a manufacturing plant engineer. When installing printing presses and other large machines, I used rubber air hose as a flexible pipe to route compressed air in and through the equipment without having to do a lot of complicated plumbing.

That approach would certainly work with all the obstructions in my shop. I chose a rubber hose rated for 250 pounds per square inch (psi), plenty for my little pancake compressor. The 1/2-in. inside diameter meant no reduction in air pressure would occur along the length of the run.

(Click Image to Expand)


(Click Image to Expand)

This story originally appeared in  American Woodworker September 2006, issue #123.

Source information may have changed since the original publication date.

Source  

MSC Industrial Supply, (800) 645-7270, www.mscdirect.com

September 2006, issue #123

Purchase this back issue.

Click here to read the rest of the article from American Woodworker