American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Premium Resaw Bandsaw Blades Leavenworth KS

If you only resaw on occasion and want a blade primarily for general-purpose work, a flex-back or hard-back blade is your best choice. For hard-core resawing, the hard-back or bi-metal hook-tooth blades with three tpi did the best overall job.

The Home Depot
(913)727-1978
5000 S 4th Street
Leavenworth, KS
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

The Home Depot
(816)459-9950
4949 Old Pike Rd
Gladstone, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Fastenal- Leavenworth
913-651-4433
5100 South 13th Leavenworth, KS, 66048
Leavenworth, KS
 
Eggens True Value Hdwe
(816) 858-2414
2300 Kentucky Ave
Platte City, MO
 
Hull Lumber Do it center
(816) 386-2212
18165 Highway 45 North
Weston, MO
 
The Home Depot
(816)741-2580
8900 NW Skyview Avenue
Kansas City, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Leavenworth -Dlr In Kmart
(913) 250-6144
4820 S 4Th Street
Leavenworth, KS
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:8-22
Tue:8-22
Wed:8-22
Thu:8-22
Fri:8-22
Sat:8-21
Sun:9-20
Store Features
Mon:8-22
Tue:8-22
Wed:8-22
Thu:8-22
Fri:8-22
Sat:8-21
Sun:9-20

Westlake Ace Hardware
(913) 651-7795
3400 S 4th St Ste 4
Leavenworth, KS
 
Sebus Brothers True Value
(816) 386-2211
405 Main St
Weston, MO
 
Kansas City - D
(913) 299-1434
7836 State Ave
Kansas City, KS
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Mon:8-22
Tue:8-22
Wed:8-22
Thu:8-22
Fri:8-22
Sat:8-22
Sun:8-21
Store Features
Mon:8-22
Tue:8-22
Wed:8-22
Thu:8-22
Fri:8-22
Sat:8-22
Sun:8-21

Premium Resaw Bandsaw Blades

Premium Resaw Bandsaw Blades

Straight-cutting blades that won't let you down.

by Dave Munkittrick

A bandsaw is an amazing machine. It’s capable of making extremely precise cuts; from slicing sheets of thin veneer to cutting intricate curves. Yet many of us think of our bandsaws as being for rough work only. Why? Probably because our first attempts at precision work, like resawing, were thwarted by ordinary blades. It’s probably not your saw or your technique, it’s your blade that’s the problem. Take a premium bandsaw blade for a spin and you’ll be amazed at the difference. 

Most bandsaws come with ordinary carbon-steel or spring-steel blades. These blades are okay for general bandsaw work but the  untreated metal is not designed to withstand the rigors of resawing. Resawing wood is essentially rip cutting a board across its width (Photo 1). There’s a tremendous amount of wood to remove and the heat and abrasion caused by resawing will quickly wear out an ordinary blade. 

Premium blades have hardened teeth, and they far outlast ordinary blades. There are three basic types of premium blades; flex-back, hard-back and bi-metal (see Fig. A, below).

Shopping for bandsaw blades is like trying to pick a long distance phone company. There are so many variations and confusing terminology its hard to know what you’re getting. For starters, you’ve got silicon steel, tungsten steel, carbon manganese spring steel, or, my personal favorite, cobalt/molybdenum high-speed steel.

The real question is “How do the blades perform?” That’s what we looked at in this test.   

The Test

Resawing is by far the most demanding job asked of a bandsaw blade. A straight, even cut that doesn’t require a great deal of clean up was our gold standard. We tested all the premium resaw blades we could find that can safely be used on a 14-in. bandsaw (see “Blade Thickness,” below, for more on this topic). The test itself was straightforward. We cut 1/8-in.-thick veneer from 8 in. x 24-in. slabs of 8/4 maple, oak and pine. After each cut we ran the cut face of the slab over a jointer set to take a 1/32-in. cut. If the saw marks cleaned up in a single pass (Photo 2), the blade was declared a winner and was included in our chart below. If at first the blade did not succeed, we tried again; adjusting the tension or altering the feed rate.

Results

If you only resaw on occasion and want a blade primarily for general-purpose work, a flex-back or hard-back blade is your best choice. For hard-core resawing, the hard-back or bi-metal hook-tooth blades with three tpi did the best overall job. A bi-metal blade is considerably more expensive but it will far outlast a hard-back blade because of the extra-hard, high-speed steel used to form the teeth (Fig. A, below).

Blade Features

Let’s look at the features that make up a premium bandsaw blade (...

Click here to read the rest of the article from American Woodworker