American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Quartersawn Oak Twinsburg OH

Quartersawn boards are rarely wide enough for a large panel, so in many cases you must glue boards together or resaw and book-match a single board. Here's a rule of thumb for resawing quartersawn oak: Look at the outside faces before you cut.

The Home Depot
(330)908-1300
8211 Macedonia Commons
Macedonia, OH
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Woodcraft - Cleveland, OH
(440) 232-7979
22745 Rockside Road
Bedford, OH

Data Provided by:
The Home Depot
(216)581-6611
21000 Libby Rd
Maple Heights, OH
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(216)297-1303
3460 Mayfield Rd
Cleveland Heights, OH
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(216)741-6123
3355 Steelyard Drive
Cleveland, OH
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(330)562-6000
18800 N Market Pl Drive
Aurora, OH
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(330)422-0401
9585 State Route 14
Streetsboro, OH
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(330)922-3448
325 Howe Ave
Cuyahoga Falls, OH
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(440)895-4420
21669 Center Ridge Rd
Rocky River, OH
Hours
Mon-Thur: 7:00am-9:00pm
Fri-Sat: 7:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(330)670-0988
4066 Medina Rd
Fairlawn, OH
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Data Provided by:

Quartersawn Oak

Quartersawn Oak

3 Tips to Unlock its Beauty

by Tom Caspar

Rip Quartersawn Legs

With the right cut, you can make beautifully matching quartersawn legs from an ordinary 2-in.-thick board. The flake figure we look for in quartersawn oak comes from a tree’s ray cells, which radiate like spokes in a wheel. Mark the spot on each end of your board where a saw cut will be parallel to the rays. Cut from mark to mark. Rip quartersawn veneer from another piece of the same board and glue it on the legs’ plainsawn faces to complete the quartered look (see “Stickley-Style Chest”).


Edge a Top

On many a piece of furniture, both the top and its front edge are prominent. Unfortunately, a beautiful quartersawn top has an ordinary-looking plainsawn edge. An easy solution is to cut your own quartersawn edging from the same lumber and glue it to the top’s edge. The edging can be from 1/16 to 1/4 in. thick. Apply similar edging to drawer rails and dividers. 

Resaw a Panel

Quartersawn boards are rarely wide enough for a large panel, so in many cases you must glue boards together or resaw and book-match a single board. Here’s a rule of thumb for resawing quartersawn oak: Look at the outside faces before you cut. If both sides have strong flake figure, the inside faces will have dramatic figure, too. If one outside face has weak figure, the inside faces probably won’t be great. The best board to pick for resawing will have perpendicular growth rings (see inset photo). 


This story originally appeared in  American Woodworker September 2005, issue #116.

Source information may have changed since the original publication date.

September 2005, issue #116

Purchase this back issue.

Click here to read the rest of the article from American Woodworker