American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Quick-Adjust Drawer Slides Apex NC

Getting drawer fronts perfectly aligned inside a cabinet is now a lot easier, thanks to Accuride. Its updated 3832 series drawer slides include a clever cam-shaped adjustment device that gives you up to 3/16-in. wiggle room. Most slides have elongated slots for fussing with the fit, but cams are faster.

The Home Depot
(919)387-6554
1000 Vision Dr
Apex, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(919)851-5554
2031 Walnut Street
Cary, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(919)661-1393
2540 Timber Dr
Garner, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(919)844-7418
9517 Strickland Rd
Raleigh, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(919)217-3093
1020 Shopps At Midway
Knightdale, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Robbins Custom Sawing and Lumber for Natural Edge Slabs
(919) 779-0719
2200 Bull Run Drive
Apex, NC

Data Provided by:
The Home Depot
(919)552-2881
901 E Broad Street
Fuquay Varina, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Woodcraft - Raleigh/Durham, NC
(919) 781-1911
4317 Pleasant Valley Road
Raleigh, NC

Data Provided by:
The Home Depot
(919)419-0208
3701 MT Moriah Road
Durham, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(919)878-8771
4901 Capital Blvd
Raleigh, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Data Provided by:

Quick-Adjust Drawer Slides

Quick-Adjust Drawer Slides


 

Getting drawer fronts perfectly aligned inside a cabinet is now a lot easier, thanks to Accuride. Its updated 3832 series drawer slides include a clever cam-shaped adjustment device that gives you up to 3/16-in. wiggle room. Most slides have elongated slots for fussing with the fit, but cams are faster. Here's how they work: Mount the slide hardware in the usual way, but only drive two screws into the drawer box. Push the drawer into the opening and check the gap around the front. If it's uneven, simply pull out the drawer and turn a cam to move either side of the drawer front up or down. When the gaps are even, drive additional screws into the drawer box to lock it in place. The 3832 slides are full extension and can take a 100-lb. load. The cam adjustment is also available on a variety of other slides for heavier loads or larger drawers.

Source
Accuride, (562) 903-0200, www.accuride.com, 3832 + Cam Drawer Adjust slides, available in 2-in. increments from 10 to 28 in. 16-in., $16; 22-in., $18.


Click here to read the rest of the article from American Woodworker