American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Rail and Stile Set with Adjustable Slot Circle Pines MN

It comes with a variety of shims, spacers and cutters that allow makinggrooves (and the matching tongues) in two size ranges: from 0.197 in.to 0.272 in. (approximately 3/16 in. to 9/32 in.) and 0.433 in. to0.523 in. (approximately 7/16 in. to 17/32 in.). It takes test cuts andtrial and error to get the bit set up right, depending on your panelmaterial's thickness, but instructions from Amana simplify the process.

The Home Depot
(763)717-0316
4550 Pheasant Ridge Dr
Blaine, MN
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(763)571-9600
5650 Main St, NE
Fridley, MN
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(651)464-5277
1943 W Broadway Avenue
Forest Lake, MN
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

The Home Depot
(651)770-9600
2360 White Bear Ave No
Maplewood, MN
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(763)533-1200
6701 Boone Ave North
Brooklyn Park, MN
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(763)795-2060
99 Northtown Drive
Blaine, MN
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

The Home Depot
(763)422-1200
3550 124th Ave NW
Coon Rapids, MN
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Rockler Woodworking and Hardware #13
(651) 773-5285
1935 Beam Avenue
Maplewood, MN

Data Provided by:
The Home Depot
(612)782-9594
1520 New Brighton Blvd
Minneapolis, MN
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(763)494-0117
15800 Grove Circle North
Maple Grove, MN
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

Data Provided by:

Rail and Stile Set with Adjustable Slot

Rail and Stile Set with Adjustable Slot

 

Have you ever slid a piece of 1/4-in. plywood into a 1/4-in. groove?It ain't pretty. It's a fact of life that plywood is undersized inthickness and this results in ugly gaps in doors with plywood panels.So here's the skinny—skinny bit, that is. With Amana Tools' newIn-Stile and Rail System router bit set for $155, you can match thesize of the groove to the exact size of the plywood. This allows easilycustom fitting the groove to the panel. The set works for undersized1/4-in. and 1/2-in. plywood in rail and stile material from 3/4 in. to1-1/4 in. thick.
Each two-piece matched set works like a stackable dado.
It comes with a variety of shims, spacers and cutters that allow makinggrooves (and the matching tongues) in two size ranges: from 0.197 in.to 0.272 in. (approximately 3/16 in. to 9/32 in.) and 0.433 in. to0.523 in. (approximately 7/16 in. to 17/32 in.). It takes test cuts andtrial and error to get the bit set up right, depending on your panelmaterial's thickness, but instructions from Amana simplify the process.When you've found the perfect setup, using the bits is no differentfrom using any other matched bit set. Sets are available in threeprofiles: ogee, bead and concave (pictured). All have 1/2-in. shanksand produce a 3/8-in.-long tongue. The price of each set is slightlyhigher than prices for matched sets that don't allow customizing thegroove size.

Source
Amana Tools, (800) 445-0077, www.amanatool.com, In-Stile and Rail System: ogee, #55436; bead, #55437; or concave, #55433; $155.

Click here to read the rest of the article from American Woodworker