American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Rail and Stile Set with Adjustable Slot Denver CO

It comes with a variety of shims, spacers and cutters that allow makinggrooves (and the matching tongues) in two size ranges: from 0.197 in.to 0.272 in. (approximately 3/16 in. to 9/32 in.) and 0.433 in. to0.523 in. (approximately 7/16 in. to 17/32 in.). It takes test cuts andtrial and error to get the bit set up right, depending on your panelmaterial's thickness, but instructions from Amana simplify the process.

Frank Paxton Lumber Company - Woodcrafter's Store
(303) 399-6047
4837 Jackson Street PO Box 16343
Denver, CO

Data Provided by:
The Home Depot
(303)320-3738
3870 Quebec Street
Denver, CO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(303)205-5141
7200 W Colfax Ave
Lakewood, CO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(303)232-6303
6701 W Alameda Ave
Lakewood, CO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(303)456-4000
5215 Wadsworth Blvd
Arvada, CO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(303)765-0400
500 S Santa Fe Dr
Denver, CO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(720)524-2480
860 S Colorado Blvd
Glendale, CO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Rockler Woodworking and Hardware #3
(303) 782-0588
2553 S. Colorado Blvd. Suite 108
Denver, CO

Data Provided by:
The Home Depot
(303)255-8000
10003 Grant Street
Denver, CO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(303)922-0444
3130 S Sheridan Blvd
Denver, CO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Data Provided by:

Rail and Stile Set with Adjustable Slot

Rail and Stile Set with Adjustable Slot

 

Have you ever slid a piece of 1/4-in. plywood into a 1/4-in. groove?It ain't pretty. It's a fact of life that plywood is undersized inthickness and this results in ugly gaps in doors with plywood panels.So here's the skinny—skinny bit, that is. With Amana Tools' newIn-Stile and Rail System router bit set for $155, you can match thesize of the groove to the exact size of the plywood. This allows easilycustom fitting the groove to the panel. The set works for undersized1/4-in. and 1/2-in. plywood in rail and stile material from 3/4 in. to1-1/4 in. thick.
Each two-piece matched set works like a stackable dado.
It comes with a variety of shims, spacers and cutters that allow makinggrooves (and the matching tongues) in two size ranges: from 0.197 in.to 0.272 in. (approximately 3/16 in. to 9/32 in.) and 0.433 in. to0.523 in. (approximately 7/16 in. to 17/32 in.). It takes test cuts andtrial and error to get the bit set up right, depending on your panelmaterial's thickness, but instructions from Amana simplify the process.When you've found the perfect setup, using the bits is no differentfrom using any other matched bit set. Sets are available in threeprofiles: ogee, bead and concave (pictured). All have 1/2-in. shanksand produce a 3/8-in.-long tongue. The price of each set is slightlyhigher than prices for matched sets that don't allow customizing thegroove size.

Source
Amana Tools, (800) 445-0077, www.amanatool.com, In-Stile and Rail System: ogee, #55436; bead, #55437; or concave, #55433; $155.

Click here to read the rest of the article from American Woodworker