American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Rail and Stile Set with Adjustable Slot Derry NH

It comes with a variety of shims, spacers and cutters that allow makinggrooves (and the matching tongues) in two size ranges: from 0.197 in.to 0.272 in. (approximately 3/16 in. to 9/32 in.) and 0.433 in. to0.523 in. (approximately 7/16 in. to 17/32 in.). It takes test cuts andtrial and error to get the bit set up right, depending on your panelmaterial's thickness, but instructions from Amana simplify the process.

Rockler Woodworking and Hardware #34
(603) 898-5941
373 S. Broadway
Salem, NH

Data Provided by:
Jim Rogers Sawmill
(800) 422-6250
117-R Jewett St.
Georgetown, MA

Data Provided by:
Lowe's
(603) 518-9146
707 Huse Road
Manchester, NH
Hours
M-SA 6 am - 10 pm
SU 8 am - 8 pm

Mar-Jam Supply Inc.
(603) 624-4900
257 Mammoth Road
Manchester, NH
 
Leblanc True Value Hardware
(603) 623-6742
621 Hayward St
Manchester, NH
 
Northland Forest Products, Inc.
(603) 642-3665
16 Church StreetPO Box 369
Kingston, NH

Data Provided by:
The Mall At Rockingham Pk
(603) 894-7700
77 Rockingham Park Blvd
Salem, NH
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:8-21
Sun:10-18.5
Store Features
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:8-21
Sun:10-18.5

Mall Of New Hampshire
(603) 628-5200
1500 S Willow St
Manchester, NH
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:8-21
Sun:10.5-18.5
Store Features
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:8-21
Sun:10.5-18.5

East Coast Lbr & Bldg Sply Co
(603) 329-5322
4 Colonial Drive
East Hampstead, NH
 
Hudson True Value Hdw.
(603) 883-3100
114 Derry Road
Hudson, NH
 
Data Provided by:

Rail and Stile Set with Adjustable Slot

Rail and Stile Set with Adjustable Slot

 

Have you ever slid a piece of 1/4-in. plywood into a 1/4-in. groove?It ain't pretty. It's a fact of life that plywood is undersized inthickness and this results in ugly gaps in doors with plywood panels.So here's the skinny—skinny bit, that is. With Amana Tools' newIn-Stile and Rail System router bit set for $155, you can match thesize of the groove to the exact size of the plywood. This allows easilycustom fitting the groove to the panel. The set works for undersized1/4-in. and 1/2-in. plywood in rail and stile material from 3/4 in. to1-1/4 in. thick.
Each two-piece matched set works like a stackable dado.
It comes with a variety of shims, spacers and cutters that allow makinggrooves (and the matching tongues) in two size ranges: from 0.197 in.to 0.272 in. (approximately 3/16 in. to 9/32 in.) and 0.433 in. to0.523 in. (approximately 7/16 in. to 17/32 in.). It takes test cuts andtrial and error to get the bit set up right, depending on your panelmaterial's thickness, but instructions from Amana simplify the process.When you've found the perfect setup, using the bits is no differentfrom using any other matched bit set. Sets are available in threeprofiles: ogee, bead and concave (pictured). All have 1/2-in. shanksand produce a 3/8-in.-long tongue. The price of each set is slightlyhigher than prices for matched sets that don't allow customizing thegroove size.

Source
Amana Tools, (800) 445-0077, www.amanatool.com, In-Stile and Rail System: ogee, #55436; bead, #55437; or concave, #55433; $155.

Click here to read the rest of the article from American Woodworker