American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Rail and Stile Set with Adjustable Slot Elkhorn WI

It comes with a variety of shims, spacers and cutters that allow makinggrooves (and the matching tongues) in two size ranges: from 0.197 in.to 0.272 in. (approximately 3/16 in. to 9/32 in.) and 0.433 in. to0.523 in. (approximately 7/16 in. to 17/32 in.). It takes test cuts andtrial and error to get the bit set up right, depending on your panelmaterial's thickness, but instructions from Amana simplify the process.

The Home Depot
(262)248-6297
550 N Edwards Blvd
Lake Geneva, WI
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

The Home Depot
(262)363-7141
232 E Wolf Run
Mukwonago, WI
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

Woller True Value
(262) 723-2286
455 E Geneva St
Elkhorn, WI
 
Ace Hardware
(262) 728-8228
840 E Geneva St
Delavan, WI
 
Lake Geneva - Auth Hometown
(262) 248-8571
200 Edwards Blvd Ste C
Lake Geneva, WI
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-21
Tue:9-21
Wed:9-21
Thu:9-21
Fri:9-21
Sat:9-18
Sun:10-16
Store Features
Mon:9-21
Tue:9-21
Wed:9-21
Thu:9-21
Fri:9-21
Sat:9-18
Sun:10-16

BADGER HARDWOODS OF WISCONSIN, LTD.
(262) 275-1162
N1517 US Highway 14
Walworth, WI

Data Provided by:
Jackson's Do it Best Hardware
(262) 723-3338
635 N Wisconsin Street
Elkhorn, WI
 
Delavan - Auth Hometown
(262) 740-9135
307 S Wright St
Delavan, WI
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9.5-19
Tue:9.5-19
Wed:9.5-19
Thu:9.5-19
Fri:9.5-19
Sat:9-18
Sun:11-16
Store Features
Mon:9.5-19
Tue:9.5-19
Wed:9.5-19
Thu:9.5-19
Fri:9.5-19
Sat:9-18
Sun:11-16

Lowe's
(262) 740-2728
2015 East Geneva Street
Delavan, WI
Hours
M-SA 6:30 am - 9 pm
SU 8 am - 7 pm

Dunn Lumber&true Value Hdw.
(262) 248-4459
826 North St
Lake Geneva, WI
 
Data Provided by:

Rail and Stile Set with Adjustable Slot

Rail and Stile Set with Adjustable Slot

 

Have you ever slid a piece of 1/4-in. plywood into a 1/4-in. groove?It ain't pretty. It's a fact of life that plywood is undersized inthickness and this results in ugly gaps in doors with plywood panels.So here's the skinny—skinny bit, that is. With Amana Tools' newIn-Stile and Rail System router bit set for $155, you can match thesize of the groove to the exact size of the plywood. This allows easilycustom fitting the groove to the panel. The set works for undersized1/4-in. and 1/2-in. plywood in rail and stile material from 3/4 in. to1-1/4 in. thick.
Each two-piece matched set works like a stackable dado.
It comes with a variety of shims, spacers and cutters that allow makinggrooves (and the matching tongues) in two size ranges: from 0.197 in.to 0.272 in. (approximately 3/16 in. to 9/32 in.) and 0.433 in. to0.523 in. (approximately 7/16 in. to 17/32 in.). It takes test cuts andtrial and error to get the bit set up right, depending on your panelmaterial's thickness, but instructions from Amana simplify the process.When you've found the perfect setup, using the bits is no differentfrom using any other matched bit set. Sets are available in threeprofiles: ogee, bead and concave (pictured). All have 1/2-in. shanksand produce a 3/8-in.-long tongue. The price of each set is slightlyhigher than prices for matched sets that don't allow customizing thegroove size.

Source
Amana Tools, (800) 445-0077, www.amanatool.com, In-Stile and Rail System: ogee, #55436; bead, #55437; or concave, #55433; $155.

Click here to read the rest of the article from American Woodworker