American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Rail and Stile Set with Adjustable Slot Galax VA

It comes with a variety of shims, spacers and cutters that allow makinggrooves (and the matching tongues) in two size ranges: from 0.197 in.to 0.272 in. (approximately 3/16 in. to 9/32 in.) and 0.433 in. to0.523 in. (approximately 7/16 in. to 17/32 in.). It takes test cuts andtrial and error to get the bit set up right, depending on your panelmaterial's thickness, but instructions from Amana simplify the process.

LOWE'S OF GALAX, VA.
276 238-3000
8417 CARROLLTON/PIKE ROAD GALAX, VA, 24333
Galax, VA
 
Blevins Do it Best Building
(276) 236-8171
302 South Main Street
Galax, VA
 
Blevins Do it Best Building
(336) 372-4000
652 North Main Street
Sparta, NC
 
The Home Depot
(804)695-9037
6921 Walton Lane
Gloucester, VA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(703)534-9580
6210 Seven Corners Ctr
Falls Church, VA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Lowe's
(276) 238-3000
8417 Carrollton/Pike Road
Galax, VA
Hours
M-SA 7 am - 9 pm
SU 9 am - 7 pm

Galax - Auth Hometown
(276) 238-8600
972 E Stuart Dr
Galax, VA
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-19
Tue:9-19
Wed:9-20
Thu:9-20
Fri:9-20
Sat:9-19
Sun:12-18
Store Features
Mon:9-19
Tue:9-19
Wed:9-20
Thu:9-20
Fri:9-20
Sat:9-19
Sun:12-18

Blevins Do it Best Building
(336) 363-2216
7258 Hwy 21 South
Glade Valley, NC
 
AustralianBurls.com
(757) 816-5622
1013 Fairway Dr
Chesapeake, VA

Data Provided by:
Woodcraft - Norfolk/Virginia Beach, VA
(757) 466-1166
The Shops at Janaf, Suite 152
Norfolk, VA

Data Provided by:
Data Provided by:

Rail and Stile Set with Adjustable Slot

Rail and Stile Set with Adjustable Slot

 

Have you ever slid a piece of 1/4-in. plywood into a 1/4-in. groove?It ain't pretty. It's a fact of life that plywood is undersized inthickness and this results in ugly gaps in doors with plywood panels.So here's the skinny—skinny bit, that is. With Amana Tools' newIn-Stile and Rail System router bit set for $155, you can match thesize of the groove to the exact size of the plywood. This allows easilycustom fitting the groove to the panel. The set works for undersized1/4-in. and 1/2-in. plywood in rail and stile material from 3/4 in. to1-1/4 in. thick.
Each two-piece matched set works like a stackable dado.
It comes with a variety of shims, spacers and cutters that allow makinggrooves (and the matching tongues) in two size ranges: from 0.197 in.to 0.272 in. (approximately 3/16 in. to 9/32 in.) and 0.433 in. to0.523 in. (approximately 7/16 in. to 17/32 in.). It takes test cuts andtrial and error to get the bit set up right, depending on your panelmaterial's thickness, but instructions from Amana simplify the process.When you've found the perfect setup, using the bits is no differentfrom using any other matched bit set. Sets are available in threeprofiles: ogee, bead and concave (pictured). All have 1/2-in. shanksand produce a 3/8-in.-long tongue. The price of each set is slightlyhigher than prices for matched sets that don't allow customizing thegroove size.

Source
Amana Tools, (800) 445-0077, www.amanatool.com, In-Stile and Rail System: ogee, #55436; bead, #55437; or concave, #55433; $155.

Click here to read the rest of the article from American Woodworker