American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Rollers Ease Plywood Storage Prescott AZ

Plywood storage roller works great and it's simple to make. The following article has some tips to offer to help you build your own storage roller. So read on to get more details below.

The Home Depot
(928)771-8467
1941 E Highway 69
Prescott, AZ
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 7:00am-8:00pm

Gateway Mall
(928) 777-7700
3400 Gateway Blvd
Prescott, AZ
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:10-20
Tue:10-20
Wed:10-20
Thu:10-20
Fri:10-21
Sat:10-21
Sun:11-18
Store Features
Mon:10-20
Tue:10-20
Wed:10-20
Thu:10-20
Fri:10-21
Sat:10-21
Sun:11-18

Foxworth Galbraith- Prescott
928-445-2525
430 North 6th Street Prescott, AZ, 86301
Prescott, AZ
 
Prescott Valley Ace Hardware
(928) 772-8111
7211 E 1st St
Prescott Valley, AZ
 
Hunt's Do it Best Lumber
(928) 636-2333
1204 N Hwy 89
Chino Valley, AZ
 
The Home Depot
(928)777-2400
5500 E State Route 69
Prescott Valley, AZ
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 7:00am-8:00pm

Lowe's
(928) 541-8640
2300 East State Route 69
Prescott, AZ
Hours
M-SA 6 am - 9 pm
SU 8 am - 8 pm

Fastenal- Prescott Valley
928-772-6325
9551 E. Lorna Lane, Suite E/F Prescott Valley, AZ, 86314
Prescott Valley, AZ
 
Kmart 4880 / Cross Merch
(928) 772-0017
7550 E State Hwy 69
Prescott Vall, AZ
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

Arizona General Ace Hardware
(928) 636-4401
1395 S Hwy 89-
Chino Valley, AZ
 

Rollers Ease Plywood Storage

Rollers Ease Plywood Storage

Before I installed these rollers, sliding plywood in and out of my storage rack used to wear me out. It also damaged the edges of the sheets. Now plywood sheets glide in and out.I cut the 2-1/2-in.-dia. rollers from 3/4-in. hard maple on my drill press using a fly cutter. You could also cut them on a bandsaw with a circle-cutting jig. I drilled out the centers to 17/32 in., so they would spin on the 1/2-in. hex-head bolts I use as spindles.My rack consists of four evenly spaced blocks attached to uprights and a 4-in.-wide x 6-ft.-long solid-wood backboard. The backboard is screwed tothe wall; the uprights fasten to a board mounted on the ceiling.

Before assembling the rack, I laid out and drilled holes in the uprights and backboard for the hex-head bolts. I counterbored the backboard’s holes for the 1/2-in. nuts that the 7-in.-long bolts screw into. After screwing the blocks to the backboard and installing the nuts, I screwed the assembly to the wall. Then I screwed each upright to the block on the floor and the board on the ceiling. Installing the rollers and their 1/2-in. washer spacers was the last step. I slid them onto the bolts before screwing the bolts into the backboard’s housed nuts.

Click here to read the rest of the article from American Woodworker