American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Rough Lumber Charlestown MA

Looking for Rough Lumber in Charlestown? We have compiled a list of businesses and services around Charlestown that should help you with your search. We hope this page helps you find Rough Lumber in Charlestown.

Rockler Woodworking and Hardware #4
(617) 497-1136
2154 Massachusetts Avenue
Cambridge, MA

Data Provided by:
Economy True Value
(617) 536-4280
219 Massachusetts Avenue
Boston, MA
 
Economy True Value
(617) 277-8811
1012 Beacon Street
Brookline, MA
 
Cambridgeside Galleria
(617) 252-3500
100 Cambridgeside Pl
Cambridge, MA
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:9-21
Sun:11-19
Store Features
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:9-21
Sun:11-19

Yumont True Value
(617) 524-4572
702 Center St
Jamaica Plain, MA
 
Woodcraft - Woburn/Boston
(781) 935-6414
313 Montvale Ave.
Woburn, MA

Data Provided by:
Aborn True Value Hardware
(617) 739-9000
438 Harvard Street
Brookline, MA
 
Back Bay Hardware
(617) 536-0913
233 Newbury St
Boston, MA
 
Economy True Value
(617) 864-3300
438 Massachusetts Avenue
Cambridge, MA
 
Dickson Bros. True Value
(617) 876-6760
26 Brattle St
Cambridge, MA
 
Data Provided by:

Joint Rough Lumber with a Planer - Techniques - American Woodworker

Joint Rough Lumber with a Planer

I came across some wonderful oak boards for a small table I wanted to build. The problem was the boards were too wide for my jointer and I didn't want to rip them any narrower. I solved my dilemma with this planer sled that allows me to use my planer as a jointer. The trick is to keep the board from rocking during planing. A wood shim under the high corner is all it takes. I add hot-melt glue to the shim and all four corners of the board to keep them from shifting on the sled during planing. Once I have one side planed flat I take the board off the sled, flip it over and plane the other side. The boards for my table were only 4-ft. long and the sled is about 6-in. longer. This technique works equally well for longer boards although you will need a longer sled and you may need additional shims along the sides.


...

Click here to read the rest of the article from American Woodworker