American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Rough Lumber Williston ND

Looking for Rough Lumber in Williston? We have compiled a list of businesses and services around Williston that should help you with your search. We hope this page helps you find Rough Lumber in Williston.

Farmers Union Lumber
(701) 572-8356
320 26th Street E
Williston, ND
 
Williston True Value
(701) 572-7300
10 E 26th Street
Williston, ND
 
Olsen Hardware Inc.
(701) 636-4151
1 S Main
Hillsboro, ND
 
Fastenal- Bismarck
701-255-4408
1405 Airport Rd Bismarck, ND, 58504
Bismarck, ND
 
Newby's Ace Hardware
(701) 483-1238
1173 3rd Ave W, T-Rex Plaza
Dickinson, ND
 
Williston - Auth Hometown
(701) 572-6000
2308 11Th Ave West
Williston, ND
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9.5-19
Tue:9.5-19
Wed:9.5-19
Thu:9.5-19
Fri:9.5-19
Sat:9-18
Sun:12-17
Store Features
Mon:9.5-19
Tue:9.5-19
Wed:9.5-19
Thu:9.5-19
Fri:9.5-19
Sat:9-18
Sun:12-17

The Home Depot
(701)282-2078
4700 17th Avenue SW
Fargo, ND
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 12:00pm-8:00pm

Larimore True Value
(701) 343-2392
212 Towner Ave
Larimore, ND
 
Fastenal- Fargo
701-271-1055
3239 15th St S Suite A Fargo, ND, 58106
Fargo, ND
 
Links True Value
(701) 288-3421
112 W Main
Ashley, ND
 

Joint Rough Lumber with a Planer - Techniques - American Woodworker

Joint Rough Lumber with a Planer

I came across some wonderful oak boards for a small table I wanted to build. The problem was the boards were too wide for my jointer and I didn't want to rip them any narrower. I solved my dilemma with this planer sled that allows me to use my planer as a jointer. The trick is to keep the board from rocking during planing. A wood shim under the high corner is all it takes. I add hot-melt glue to the shim and all four corners of the board to keep them from shifting on the sled during planing. Once I have one side planed flat I take the board off the sled, flip it over and plane the other side. The boards for my table were only 4-ft. long and the sled is about 6-in. longer. This technique works equally well for longer boards although you will need a longer sled and you may need additional shims along the sides.


...

Click here to read the rest of the article from American Woodworker