American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Rout Ellipses with Ease La Grande OR

Two new jigs from Trend make routing ellipses as easy as routing circles. Actually, these jigs rout circles, too. The Mini Ellipse Jig (shown above) is designed for use with a light-duty plunge router. It allows routing ellipses from 9-in. by 7-in. to 23-in. x 20-1/2-in. Install the pencil plug and you can also use the jig to draw ellipses and circles.

La Grande - Auth Hometown
(541) 963-8451
1700 Portland Ave
La Grande, OR
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9.5-18.5
Tue:9.5-18.5
Wed:9.5-18.5
Thu:9.5-18.5
Fri:9.5-18.5
Sat:9-18
Sun:11-16
Store Features
Mon:9.5-18.5
Tue:9.5-18.5
Wed:9.5-18.5
Thu:9.5-18.5
Fri:9.5-18.5
Sat:9-18
Sun:11-16

D & B Supply
(541) 963-8466
10101 E 1st Street
La Grande, OR
 
Bare's Hometown Hardware
(541) 562-5472
206 S Main St
Union, OR

Data Provided by:
The Home Depot
(503)925-8447
20260 SW Pacific Hwy
Sherwood, OR
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(541)434-9025
808 Seneca Rd
Eugene, OR
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Millers Dib Home Ctr & Lumber
(541) 963-3113
307 Greenwood Street
La Grande, OR
 
Hometown Hardware
(541) 562-5472
206 S Main
Union, OR
 
The Home Depot
(541)512-1458
3345 N Phoenix Road
Phoenix, OR
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(503)587-7130
3021 Cherry Ave NE
Salem, OR
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(503)674-3944
25101 SE Stark Street
Troutdale, OR
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Data Provided by:

Rout Ellipses with Ease

Rout Ellipses with Ease

 

    

Two new jigs from Trend make routing ellipses as easy as routing circles. Actually, these jigs rout circles, too. The Mini Ellipse Jig (shown above) is designed for use with a light-duty plunge router. It allows routing ellipses from 9-in. by 7-in. to 23-in. x 20-1/2-in. Install the pencil plug and you can also use the jig to draw ellipses and circles.

The jig consists of a plate that attaches to the router and a cross frame that attaches to the bottom of the workpiece. A pair of pivot points that slide in the cross frame's perpendicular T-slots connect these two pieces. To determine the size of the ellipse, you simply adjust and lock the pivot points on the router plate. The Ellipse Jig works the same way, but features an aluminum cross frame and trammel rods in lieu of the Mini's router plate. It allows routing ellipses up to 72 in. by 66 in.

Source
Trend Routing Technology, www.trend-usa.com, 270-872-4674, Mini Ellipse Jig, ME/JIG, $149, Ellipse Jig, ELLIPSE J/A, $239.

Click here to read the rest of the article from American Woodworker