American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Router Lifts Baker LA

Most lifts do not give you a cumulative readout. In other words, you have to keep track of the number of crank revolutions for height changes greater than 1/16 in. Some lifts allow you to zero out the height indicator. This is a great feature because it makes it possible to set your bits to exactly the same height every time you use them. For example, it practically eliminates the need for test cuts whenever you make stiles and rails for panel doors.

The Home Depot
(225)658-2592
6600 Main Street
Zachary, LA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(225) 201-1778
8181 Airline Hwy
Baton Rouge, LA
 
The Home Depot
(225)664-3656
2255 Home Depot Dr
Denham Springs, LA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Baker Hardware
(225) 775-1221
6655 Lavey Lane
Baker, LA
 
Le Blancs' Ace Hardware
(225) 658-2784
2300 Church St
Zachary, LA
 
The Home Depot
(225)201-1778
8181 Airline Highway
Baton Rouge, LA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(225)293-9629
10300 Coursey Blvd
Baton Rouge, LA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(225)755-1729
18139 Highland Rd
Baton Rouge, LA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Acadian True Value Hdwe
(225) 355-8270
7350 Scenic Hwy
Baton Rouge, LA
 
Pelican State Supply
(225) 354-7916
2540 Scenic Hwy
Baton Rouge, LA
 

Router Lifts

Router Lifts



For the serious router table user, the benefits of owning a router lift are huge. Strap a 3-1/4-hp variable-speed router into one of these lifts and you have a routing system that can't be beat for convenience, power and accuracy. With a router lift, all your height adjustments can be made from the top of the table instead of underneath and bit changes no longer require removing the router from the table. A router lift is essentially a router-table mounting plate with an attached carriage that holds the router. A removable crank handle inserts into the mounting plate and turns to raise and lower the carriage with incredible precision. A dial built into the plate or fastened onto the crank measures height adjustments in 1/64-in. or finer increments. Most lifts do not give you a cumulative readout. In other words, you have to keep track of the number of crank revolutions for height changes greater than 1/16 in. Some lifts allow you to zero out the height indicator. This is a great feature because it makes it possible to set your bits to exactly the same height every time you use them. For example, it practically eliminates the need for test cuts whenever you make stiles and rails for panel doors. 

PHOTO 1:
Router lifts allow bit-height adjustments from the top of the table. No more groping under the table to release and adjust the router motor.

PHOTO 2:
Above-the-table bit changes can be made with most router lifts. That means you no longer have to drop the router out from under the table to change bits.

PHOTO 3:
Router lifts make super-accurate micro-adjustments. You can confidently make adjustments as small as 1/1,000 in.

Router lifts eliminate the three biggest complaints router table users have. Above-the-table height adjustments (Photo 1) eliminate the most common complaint: the need to awkwardly grope under the table to adjust the bit height. Above-the-table bit changes (Photo 2) do away with having to remove the router to change bits. Finally, accurate micro-adjustments are a reality with a lift (Photo 3). Still, as someone who just graduated from a hole cut in a piece of plywood, I was skeptical. After all, a router lift costs as much as a good router. But once I tried a lift, it didn't take long for me to become a believer. All the lifts we tested performed well. The height adjustments were smooth and accurate. Backlash (that slop you feel in the handle when changing directions) was minimal and most lifts have backlash eliminators (see Chart). We found that carriage travel varied quite a bit among brands. A router lift should have at least 3 in. of carriage travel. This allows you to start a tall bit low in the table and gradually raise it as you cut deeper with each pass. In the end, your choice of lift will depend on your particular circumstances.

Click here to read the rest of the article from American Woodworker