American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Router Lifts Norfolk NE

Most lifts do not give you a cumulative readout. In other words, you have to keep track of the number of crank revolutions for height changes greater than 1/16 in. Some lifts allow you to zero out the height indicator. This is a great feature because it makes it possible to set your bits to exactly the same height every time you use them. For example, it practically eliminates the need for test cuts whenever you make stiles and rails for panel doors.

Farm & Ranch
(402) 371-2260
1500 S 1st St
Norfolk, NE
 
Norfolk - Auth Hometown
(402) 371-3505
2110 Market Ln
Norfolk, NE
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:12-17
Store Features
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:12-17

Carhart Lumber Company
(402) 644-7839
2100 Riverside Blvd
Norfolk, NE
 
Magdanz Inc
(402) 329-6735
114 E Main St
Pierce, NE

Data Provided by:
The Home Depot
(402)328-9669
6800 South 70th Street
Lincoln, NE
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Mead Lumber
(402) 371-4741
1101 Omaha
Norfolk, NE
 
Scheer's Ace Hardware
(402) 371-0350
1308 Omaha Ave, Affiliated Foods
Norfolk, NE
 
Fastenal- Norfolk
402-379-0075
606 East Norfolk Ave Norfolk, NE, 68701
Norfolk, NE
 
The Home Depot
(402)331-2879
712 N Washington St
Papillion, NE
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-7:00pm

The Home Depot
(402)333-9477
12710 L Street
Omaha, NE
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Data Provided by:

Router Lifts

Router Lifts



For the serious router table user, the benefits of owning a router lift are huge. Strap a 3-1/4-hp variable-speed router into one of these lifts and you have a routing system that can't be beat for convenience, power and accuracy. With a router lift, all your height adjustments can be made from the top of the table instead of underneath and bit changes no longer require removing the router from the table. A router lift is essentially a router-table mounting plate with an attached carriage that holds the router. A removable crank handle inserts into the mounting plate and turns to raise and lower the carriage with incredible precision. A dial built into the plate or fastened onto the crank measures height adjustments in 1/64-in. or finer increments. Most lifts do not give you a cumulative readout. In other words, you have to keep track of the number of crank revolutions for height changes greater than 1/16 in. Some lifts allow you to zero out the height indicator. This is a great feature because it makes it possible to set your bits to exactly the same height every time you use them. For example, it practically eliminates the need for test cuts whenever you make stiles and rails for panel doors. 

PHOTO 1:
Router lifts allow bit-height adjustments from the top of the table. No more groping under the table to release and adjust the router motor.

PHOTO 2:
Above-the-table bit changes can be made with most router lifts. That means you no longer have to drop the router out from under the table to change bits.

PHOTO 3:
Router lifts make super-accurate micro-adjustments. You can confidently make adjustments as small as 1/1,000 in.

Router lifts eliminate the three biggest complaints router table users have. Above-the-table height adjustments (Photo 1) eliminate the most common complaint: the need to awkwardly grope under the table to adjust the bit height. Above-the-table bit changes (Photo 2) do away with having to remove the router to change bits. Finally, accurate micro-adjustments are a reality with a lift (Photo 3). Still, as someone who just graduated from a hole cut in a piece of plywood, I was skeptical. After all, a router lift costs as much as a good router. But once I tried a lift, it didn't take long for me to become a believer. All the lifts we tested performed well. The height adjustments were smooth and accurate. Backlash (that slop you feel in the handle when changing directions) was minimal and most lifts have backlash eliminators (see Chart). We found that carriage travel varied quite a bit among brands. A router lift should have at least 3 in. of carriage travel. This allows you to start a tall bit low in the table and gradually raise it as you cut deeper with each pass. In the end, your choice of lift will depend on your particular circumstances.

Click here to read the rest of the article from American Woodworker