American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Router Wrench Risers Traverse City MI

Fasten a gasket on each side of one wrench with spray adhesive or contact cement. Then use a utility knife to sculpt the opening. The following article has more tips.

The Home Depot
(231)922-9440
2522 Crossing Circle
Traverse City, MI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

De Weese Do it Best Hardware
(231) 947-7670
1029 Carver
Traverse City, MI
 
Kmart 3009 / Cross Merch
(231) 941-0600
1712 S Garfield Ave
Traverse City, MI
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

Brown Lumber
(231) 947-1400
1701 Airport Rd Traverse City, MI, 49686
Traverse City, MI
 
Ace Hardware
(231) 946-2140
734 W Front St, Front and Division
Traverse City, MI
 
Rare Earth Hardwoods
(231) 946-0043
6778 East Traverse Hwy
Traverse, MI

Data Provided by:
Cummins Bridgeway
231-947-5824
863 South Airport Traverse City, MI, 49686
Traverse City, MI
 
Cherryland Mall
(231) 933-5000
1212 S Airport Rd W
Traverse City, MI
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:9.5-21
Tue:9.5-21
Wed:9.5-21
Thu:9.5-21
Fri:9.5-21
Sat:9-21
Sun:11-18
Store Features
Mon:9.5-21
Tue:9.5-21
Wed:9.5-21
Thu:9.5-21
Fri:9.5-21
Sat:9-21
Sun:11-18

Fastenal- Traverse City
231-947-7665
2425 Sybrandt Ave Traverse City, MI, 49684
Traverse City, MI
 
Gill-Roy's Hometown Hardware
(231) 929-8160
2701 Zimmerman
Traverse City, MI
 
Data Provided by:

Router Wrench Risers

Router Wrench Risers

Trying to keep the wrenches that came with my router in position for tightening or loosening the collet used to drive me crazy. The nuts are so widely spaced that the slim wrenches would often slip out of place. 

Fortunately, I discovered a solution at my local hardware store: basin mack gaskets, which are stepped rubber washers used while installing sinks. 

Fasten a gasket on each side of one wrench with spray adhesive or contact cement. Then use a utility knife to sculpt the opening. 

During use, the gasket-covered wrench goes on the shaft nut. One gasket holds this wrench away from the motor housing. The other gasket acts as a platform for the wrench that goes on the collet nut. If the gaskets are too thick to properly align the wrenches, just slice them thinner. One side of this wrench works for tightening; flip it over for loosening. 

Click here to read the rest of the article from American Woodworker