American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » ยป

Rugged Low-Cost Bandsaw Fort Morgan CO

This saw accepts blades from 3/16- to 3/4-in. wide. Its table is 42 in. above the floor, which is higher than most welded-frame saws. Low tables are handy for resawing, but a higher table makes it much easier to see the line on curved cuts.

Bloedorn Lumber Building Mtrls
(970) 867-5646
130 State Street
Fort Morgan, CO
 
Mr. D'S Ace Home Center
(970) 867-3303
1000 East Platte Avenue
Fort Morgan, CO
 
Fastenal- Ft. Morgan
970-867-4475
19873 US Highway 34 Ft. Morgan, CO, 80701
Ft. Morgan, CO
 
Country Do it Best Hardware
(970) 483-7312
218 Main St.
Wiggins, CO
 
The Home Depot
(970)259-7954
1301 S Camino Del Rio
Durango, CO
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

Murdoch's Ranch & Home Supply
(970) 542-1515
1207 W. Platte Avenue
Fort Morgan, CO
 
Ft Morgan - Auth Hometown
(970) 867-5200
1997 E Piatte Ave
Fort Morgan, CO
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:12.5-17.5
Store Features
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:12.5-17.5

Farm & Home Hardware
(970) 842-2879
122 Custer St
Brush, CO
 
The Home Depot
(970)244-8577
2436 F Road
Grand Junction, CO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(303)320-3738
3870 Quebec Street
Denver, CO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Rugged Low-Cost Bandsaw

Rugged Low-Cost Bandsaw


Resawing a wide board sure pushes a bandsaw to the max. The more rigid the upper arm, the better, because you'll get a smoother cut. The upper arm is generally stiffer on a saw with a welded frame than on a saw with a cast-iron frame and riser block. At only $550, the 14-in. BW-14WBS from Bridgewood gives you stiff welded-frame construction at a not-so-stiff price. This saw has an 8-in. thickness capacity. That's slightly more than other budget-priced welded-frame saws, but less than the 12-in. capacity of a standard cast-iron saw with a riser block. This saw has ball bearing guides above and below the table, quick-release blade tension, rack-and-pinion blade guard and a 1-hp motor. A fence is included. This saw accepts blades from 3/16- to 3/4-in. wide. Its table is 42 in. above the floor, which is higher than most welded-frame saws. Low tables are handy for resawing, but a higher table makes it much easier to see the line on curved cuts.

Sources:
Wilke Machinery, (800) 235-2100, www.WilkeMachinery.com, Bridgewood BW-14WBS, $550.


Click here to read the rest of the article from American Woodworker