American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Rugged Low-Cost Bandsaw Knightdale NC

This saw accepts blades from 3/16- to 3/4-in. wide. Its table is 42 in. above the floor, which is higher than most welded-frame saws. Low tables are handy for resawing, but a higher table makes it much easier to see the line on curved cuts.

The Home Depot
(919)217-3093
1020 Shopps At Midway
Knightdale, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Klingspor’s Woodworking Shop of Raleigh
(919) 876-0707
3141 Capital Blvd.Capital Square
Raleigh, NC

Data Provided by:
The Home Depot
(919)844-7418
9517 Strickland Rd
Raleigh, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(919)562-2202
11915 Retail Drive
Wake Forest, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(919)387-6554
1000 Vision Dr
Apex, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(919)878-8771
4901 Capital Blvd
Raleigh, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(919)661-1393
2540 Timber Dr
Garner, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Woodcraft - Raleigh/Durham, NC
(919) 781-1911
4317 Pleasant Valley Road
Raleigh, NC

Data Provided by:
The Home Depot
(919)851-5554
2031 Walnut Street
Cary, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Robbins Custom Sawing and Lumber for Natural Edge Slabs
(919) 779-0719
2200 Bull Run Drive
Apex, NC

Data Provided by:
Data Provided by:

Rugged Low-Cost Bandsaw

Rugged Low-Cost Bandsaw


Resawing a wide board sure pushes a bandsaw to the max. The more rigid the upper arm, the better, because you'll get a smoother cut. The upper arm is generally stiffer on a saw with a welded frame than on a saw with a cast-iron frame and riser block. At only $550, the 14-in. BW-14WBS from Bridgewood gives you stiff welded-frame construction at a not-so-stiff price. This saw has an 8-in. thickness capacity. That's slightly more than other budget-priced welded-frame saws, but less than the 12-in. capacity of a standard cast-iron saw with a riser block. This saw has ball bearing guides above and below the table, quick-release blade tension, rack-and-pinion blade guard and a 1-hp motor. A fence is included. This saw accepts blades from 3/16- to 3/4-in. wide. Its table is 42 in. above the floor, which is higher than most welded-frame saws. Low tables are handy for resawing, but a higher table makes it much easier to see the line on curved cuts.

Sources:
Wilke Machinery, (800) 235-2100, www.WilkeMachinery.com, Bridgewood BW-14WBS, $550.


Click here to read the rest of the article from American Woodworker