American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Shaper or Router Table? Avondale AZ

A 3-1/2-hp router table setup can handle the occasional kitchen and, coupled with today's router bits, is even capable of making full-size, 1-3/4-in.-thick exterior doors. But a router is not designed for large-scale wood removal on a continuous basis.

The Home Depot
(623)925-2896
1489 N Dysart Rd
Avondale, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(623)849-1200
7333 McDowell
Phoenix, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Home Depot Store 0453
(623) 412-1750
9201 W. Peoria
Peoria, AZ
 
The Home Depot
(623)849-0125
4848 N 43rd Avenue
Phoenix, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(623)544-1129
13760 W Bell Rd
Surprise, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(623)772-1034
9969 W Camelback Road
Phoenix, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(602)605-8690
5230 W Baseline Road
Laveen, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(623)412-1750
9201 W Peoria Ave
Peoria, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(623)487-7357
5902 W Peoria Ave
Glendale, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(623)376-6735
25650 N Lke Pleasant Pky
Peoria, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Shaper or Router Table?

Shaper or Router Table?




Q. I'm thinking about starting a side business building custom doors. Should I consider investing in a shaper or use my router table?

 

Shaper cutters are larger and last longer than router bits.  The heavy weight large-diameter shaper cutter is designed to remove large amounts of material.

A. Get a shaper. Simply stated, the shaper produces more in less time than a router can. A 3-1/2-hp router table setup can handle the occasional kitchen and, coupled with today's router bits, is even capable of making full-size, 1-3/4-in.-thick exterior doors. But a router is not designed for large-scale wood removal on a continuous basis. A 1-1/2-hp shaper will actually remove more wood than a 3-1/2-hp router. That's because routers have lightweight universal motors designed for handheld use that develop low torque. A shaper uses an induction motor designed for continuous, heavy-duty use with torque to spare. Torque is what allows a shaper to hog off two to three times as much wood as a router can in a single pass. You'll still need a good router table setup. Small-diameter bits need the high rpm to make a clean cut. Although shapers have adapters that allow you to run router bits, they don't spin them fast enough for an optimal cut.


Click here to read the rest of the article from American Woodworker