American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Shaper or Router Table? Bolivar MO

A 3-1/2-hp router table setup can handle the occasional kitchen and, coupled with today's router bits, is even capable of making full-size, 1-3/4-in.-thick exterior doors. But a router is not designed for large-scale wood removal on a continuous basis.

Meeks The Builders Choice
(417) 326-2406
1900 W Broadway
Bolivar, MO
 
Quarles Supply
(417) 777-2391
3251 Springfield Ave
Bolivar, MO
 
Roweton's Home Center
(417) 326-5611
203 E Broadway
Bolivar, MO
 
Bill Chapman Hardware
(417) 345-7512
107 N Maple St
Buffalo, MO

Data Provided by:
Lumber Logs LLC
(314) 570-1175
5148 Brown Ave.
St. Louis, MO

Data Provided by:
Bolivar - Auth Hometown
(417) 777-8819
3151 S Springfield Ave
Bolivar, MO
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:12-17
Store Features
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:12-17

Fastenal- Bolivar
417-326-5665
4736 South 131st St Bolivar, MO, 65613
Bolivar, MO
 
Meeks The Builders Choice
(417) 345-2246
100 W Dallas
Buffalo, MO
 
The Home Depot
(417)336-2322
1000 Branson Hills Pkwy
Branson, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(636)281-9535
1525 Hwy K
O Fallon, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Data Provided by:

Shaper or Router Table?

Shaper or Router Table?




Q. I'm thinking about starting a side business building custom doors. Should I consider investing in a shaper or use my router table?

 

Shaper cutters are larger and last longer than router bits.  The heavy weight large-diameter shaper cutter is designed to remove large amounts of material.

A. Get a shaper. Simply stated, the shaper produces more in less time than a router can. A 3-1/2-hp router table setup can handle the occasional kitchen and, coupled with today's router bits, is even capable of making full-size, 1-3/4-in.-thick exterior doors. But a router is not designed for large-scale wood removal on a continuous basis. A 1-1/2-hp shaper will actually remove more wood than a 3-1/2-hp router. That's because routers have lightweight universal motors designed for handheld use that develop low torque. A shaper uses an induction motor designed for continuous, heavy-duty use with torque to spare. Torque is what allows a shaper to hog off two to three times as much wood as a router can in a single pass. You'll still need a good router table setup. Small-diameter bits need the high rpm to make a clean cut. Although shapers have adapters that allow you to run router bits, they don't spin them fast enough for an optimal cut.


Click here to read the rest of the article from American Woodworker