American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Shaper or Router Table? Pacific MO

A 3-1/2-hp router table setup can handle the occasional kitchen and, coupled with today's router bits, is even capable of making full-size, 1-3/4-in.-thick exterior doors. But a router is not designed for large-scale wood removal on a continuous basis.

The Home Depot
(636)536-0675
390 Thf Boulevard
Chesterfield, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(636)922-1281
6190 Mid River Mall Dr
St Peter, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Pacific Do it Best Lumber
(636) 271-4863
625 S Fourth St
Pacific, MO
 
Dickey Bub True Value
(636) 587-3900
100 Hilltop Village Center Drive
Eureka, MO
 
Lowe's
(636) 728-0163
290 T.H.F. Blvd
Chesterfield, MO
Hours
M-SA 6 am - 10 pm
SU 8 am - 8 pm

The Home Depot
(636)207-8875
13929 Manchester Rd
Ballwin, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(314)909-7771
10890 Sunset Hills Plaza
Saint Louis, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Gray Summit Do it Best
(636) 451-2707
2625 Highway 100
Gray Summit, MO
 
LOWE'S OF CHESTERFIELD, MO.
636 728-0163
290 THF BLVD CHESTERFIELD, MO, 63005
Chesterfield, MO
 
Strubberg Hardware Inc
(636) 583-2665
425 E Main
Union, MO
 

Shaper or Router Table?

Shaper or Router Table?




Q. I'm thinking about starting a side business building custom doors. Should I consider investing in a shaper or use my router table?

 

Shaper cutters are larger and last longer than router bits.  The heavy weight large-diameter shaper cutter is designed to remove large amounts of material.

A. Get a shaper. Simply stated, the shaper produces more in less time than a router can. A 3-1/2-hp router table setup can handle the occasional kitchen and, coupled with today's router bits, is even capable of making full-size, 1-3/4-in.-thick exterior doors. But a router is not designed for large-scale wood removal on a continuous basis. A 1-1/2-hp shaper will actually remove more wood than a 3-1/2-hp router. That's because routers have lightweight universal motors designed for handheld use that develop low torque. A shaper uses an induction motor designed for continuous, heavy-duty use with torque to spare. Torque is what allows a shaper to hog off two to three times as much wood as a router can in a single pass. You'll still need a good router table setup. Small-diameter bits need the high rpm to make a clean cut. Although shapers have adapters that allow you to run router bits, they don't spin them fast enough for an optimal cut.


Click here to read the rest of the article from American Woodworker